Our 350-401 Questions And Answers practice materials are distributed at acceptable prices. These interactions have inspired us to do better. Now passing rate of them has reached up to 98 to 100 percent. Only when we pass the exam can we find the source of life and enthusiasm, become active and lasting, and we can have better jobs in today’s highly competitive times. To pass the 350-401 Questions And Answers exam, careful planning and preparation are crucial to its realization. We provide free update and the discounts for the old client.
CCNP Enterprise 350-401 Our company has also being Customer First.
Besides, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Questions And Answers exam questions will help you pass the exam and get the certification for sure. Wrong topic tend to be complex and no regularity, and the Updated 350-401 Dumps torrent prep can help the users to form a good logical structure of the wrong question, this database to each user in the simulation in the practice of all kinds of wrong topic all induction and collation, and the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) study question then to the next step in-depth analysis of the wrong topic, allowing users in which exist in the knowledge module, tell users of our Updated 350-401 Dumps exam question how to make up for their own knowledge loophole, summarizes the method to deal with such questions for, to prevent such mistakes from happening again.
The reason of making the Omgzlook stand out in so many peers is that we have a lot of timely updated practice questions and answers which accurately and correctly hit the exam. So we can well improve the exam pass rate and make the people ready to participate in Cisco certification 350-401 Questions And Answers exam safely use practice questions and answers provided by Omgzlook to pass the exam. Omgzlook 100% guarantee you to pass Cisco certification 350-401 Questions And Answers exam.
Cisco 350-401 Questions And Answers - So you can take a best preparation for the exam.
Every detail of our 350-401 Questions And Answers exam guide is going through professional evaluation and test. Other workers are also dedicated to their jobs. Even the proofreading works of the 350-401 Questions And Answers study materials are complex and difficult. They still attentively accomplish their tasks. Please have a try and give us an opportunity. Our 350-401 Questions And Answers preparation quide will totally amaze you and bring you good luck. And it deserves you to have a try!
Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Our Oracle 1z1-808-KR study materials absolutely can add more pleasure to your life. EMC D-VXR-DY-01 - These training products to help you pass the exam, we guarantee to refund the full purchase cost. If you attach great importance to the protection of personal information and want to choose a very high security product, Juniper JN0-683 real exam is definitely your first choice. SAP C-S4CPR-2402 - But they need a lot of time to participate in the certification exam training courses. Pegasystems PEGACPLSA23V1 - Each of us is dreaming of being the best, but only a few people take that crucial step.
Updated: May 28, 2022