350-401 Practice Questions Free & 350-401 Latest Exam Study Guide - Cisco Valid 350-401 Exam Dumps Free - Omgzlook

And if you get any questions, please get contact with us, our staff will be online 24/7 to solve your problems all the way. Before you place orders, you can download the free demos of 350-401 Practice Questions Free practice test as experimental acquaintance. Once you decide to buy, you will have many benefits like free update lasting one-year and convenient payment mode. With our high-accuracy 350-401 Practice Questions Free test guide, our candidates can grasp the key points, and become sophisticated with the exam content. You only need to spend 20-30 hours practicing with our Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) learn tool, passing the exam would be a piece of cake. Being the most competitive and advantageous company in the market, our 350-401 Practice Questions Free practice quiz have help tens of millions of exam candidates realize their dreams all these years.

CCNP Enterprise 350-401 New trial might change your life greatly.

CCNP Enterprise 350-401 Practice Questions Free - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry. At the same time, all operation of the online engine of the New 350-401 Exam Question training practice is very flexible as long as the network is stable. In order to save you a lot of installation troubles, we have carried out the online engine of the New 350-401 Exam Question latest exam guide which does not need to download and install.

Therefore, we believe that you will never regret to use the 350-401 Practice Questions Free exam dumps. Let’s learn 350-401 Practice Questions Free exam dumps, and you can pass the exam at once. When you pass the 350-401 Practice Questions Free exam and get a certificate, you will find that you are a step closer to your dream.

After all, you do not know the Cisco 350-401 Practice Questions Free exam clearly.

Now, our 350-401 Practice Questions Free study questions are in short supply in the market. Our sales volumes are beyond your imagination. Every day thousands of people browser our websites to select our 350-401 Practice Questions Free exam materials. As you can see, many people are inclined to enrich their knowledge reserve. So you must act from now. As we all know, time and tide wait for no man. And our 350-401 Practice Questions Free practice engine will be your best friend to help you succeed.

We will be 100% providing you convenience and guarantee. Remember that making you 100% pass Cisco certification 350-401 Practice Questions Free exam is Omgzlook.

350-401 PDF DEMO:

QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID

QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.

QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D

QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.

QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.

CIW 1D0-671 - It will play a multiplier effect to help you pass the exam. Since Cisco SAP C-S4PPM-2021 certification is so popular and our Omgzlook can not only do our best to help you pass the exam, but also will provide you with one year free update service, so to choose Omgzlook to help you achieve your dream. Now you can free download part of practice questions and answers of Cisco certification EMC D-PVM-DS-23 exam on Omgzlook. People who have got Cisco SAP C-ARCIG-2404 certification often have much higher salary than counterparts who don't have the certificate. Omgzlook's practice questions and answers about the Cisco certification Microsoft PL-600 exam is developed by our expert team's wealth of knowledge and experience, and can fully meet the demand of Cisco certification Microsoft PL-600 exam's candidates.

Updated: May 28, 2022