I believe you will be very satisfied with our products. With our products you can easily pass the exam. We promise that if you have used Omgzlook's latest Cisco certification 350-401 Practice Questions Files exam practice questions and answers exam but fail to pass the exam, Omgzlook will give you a full refund. There are free demos of our 350-401 Practice Questions Files exam questions for your reference with brief catalogue and outlines in them. You can free download the demos of our 350-401 Practice Questions Files learning prep on the website to check the content and displays easily by just clicking on them. Omgzlook is a professional website.
CCNP Enterprise 350-401 We understand your itching desire of the exam.
If you have any questions about the exam, Omgzlook the Cisco 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice Questions Files will help you to solve them. As a responsible company over ten years, we are trustworthy. In the competitive economy, this company cannot remain in the business for long.
If you participate in the IT exam, you should not hesitate to choose Omgzlook's Cisco 350-401 Practice Questions Files exam training materials. After you use, you will know that it is really good. The site of Omgzlook is well-known on a global scale.
Cisco 350-401 Practice Questions Files - If you feel exam is a headache, don't worry.
If you are still study hard to prepare the Cisco 350-401 Practice Questions Files exam, you're wrong. Of course, with studying hard, you can pass the exam. But may not be able to achieve the desired effect. Now this is the age of the Internet, there are a lot of shortcut to success. Omgzlook's Cisco 350-401 Practice Questions Files exam training materials is a good training materials. It is targeted, and guarantee that you can pass the exam. This training matrial is not only have reasonable price, and will save you a lot of time. You can use the rest of your time to do more things. So that you can achieve a multiplier effect.
You need to be responsible for your career development. The assistance of our 350-401 Practice Questions Files guide question dumps are beyond your imagination.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
If you are concerned about the test, however, you can choose Omgzlook's Cisco NAHP NRCMA exam training materials. Please be assured that with the help of Amazon DOP-C02-KR learning materials, you will be able to successfully pass the exam. And then, to take Cisco EMC D-GAI-F-01 exam can help you to express your desire. We had to spare time to do other things to prepare for CompTIA 220-1101 exam, which delayed a lot of important things. If you successfully get Cisco Cisco 300-540 certificate, you can finish your work better.
Updated: May 28, 2022