Study our 350-401 Practice Exam Fee training materials to write "test data" is the most suitable for your choice, after recent years show that the effect of our 350-401 Practice Exam Fee guide dump has become a secret weapon of the examinee through qualification examination, a lot of the users of our 350-401 Practice Exam Fee guide dump can get unexpected results in the examination. It can be said that our 350-401 Practice Exam Fee study questions are the most powerful in the market at present, not only because our company is leader of other companies, but also because we have loyal users. 350-401 Practice Exam Fee training materials are not only the domestic market, but also the international high-end market. So if you get any questions of our 350-401 Practice Exam Fee learning guide, please get us informed. It means we will deal with your doubts with our 350-401 Practice Exam Fee practice materials 24/7 with efficiency and patience. We also hope that our products are really worth buying.
CCNP Enterprise 350-401 Our experts have taken your worries seriously.
The content system of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Practice Exam Fee exam simulation is constructed by experts. When the interface displays that you have successfully paid for our 350-401 Valid Test Dumps File study materials, our specific online sales workers will soon deal with your orders. You will receive the 350-401 Valid Test Dumps File study materials no later than ten minutes.
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of 350-401 Practice Exam Fee training questions, you will agree with what I said. What our 350-401 Practice Exam Fee study materials contain are all the real questions and answers that will come out in the real exam. As long as you study with our 350-401 Practice Exam Fee exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure.
Cisco 350-401 Practice Exam Fee - Many people think this is incredible.
We have chosen a large number of professionals to make 350-401 Practice Exam Fee learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from 350-401 Practice Exam Fee exam training professionals at any time when you encounter any problems. We can be sure that with the professional help of our 350-401 Practice Exam Fee test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose 350-401 Practice Exam Fee test guide to get you closer to success.
Only need to spend about 20-30 hours practicing our 350-401 Practice Exam Fee study files can you be fully prepared for the exam. With deeply understand of core knowledge 350-401 Practice Exam Fee actual test guide, you can overcome all the difficulties in the way.
350-401 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 5
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
But our SAP C_SIGPM_2403 exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%. There are many benefits after you pass the Avaya 71801X certification such as you can enter in the big company and double your wage. Veeam VMCE_v12 - Time is so important to everyone because we have to use our limited time to do many things. And you will find that it is easy to understand the content of the SAP C_SIGPM_2403 learning guide for our experts have simplified the questions and answers. Nutanix NCP-DB - No matter what your previous learning level is, there will be no problem of understanding.
Updated: May 28, 2022