A large number of buyers pouring into our website every day can prove this. Just look at it and let yourself no longer worry about the 350-401 Latest Test Camp exam. As a thriving multinational company, we are always committed to solving the problem that our customers may have. Although we come across some technical questions of our 350-401 Latest Test Camp learning guide during development process, we still never give up to developing our 350-401 Latest Test Camp practice engine to be the best in every detail. Although our 350-401 Latest Test Camp exam braindumps have been recognised as a famous and popular brand in this field, but we still can be better by our efforts. And you can just visit our website to know its advantages.
CCNP Enterprise 350-401 It is quite convenient.
CCNP Enterprise 350-401 Latest Test Camp - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Our study materials come to your help. If you are better, you will have a more relaxed life. 350-401 Test Simulator Free guide materials allow you to increase the efficiency of your work.
our 350-401 Latest Test Camp study materials will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our 350-401 Latest Test Camp study materials without worries behind. We are so honored and pleased to be able to read our detailed introduction and we will try our best to enable you a better understanding of our 350-401 Latest Test Camp study materials better.
Cisco 350-401 Latest Test Camp - So this certification exam is very popular now.
Everyone is not willing to fall behind, but very few people take the initiative to change their situation. Take time to make a change and you will surely do it. Our 350-401 Latest Test Camp actual test guide can give you some help. Our company aims to help ease the pressure on you to prepare for the exam and eventually get a certificate. Obtaining a certificate is equivalent to having a promising future and good professional development. Our 350-401 Latest Test Camp study materials have a good reputation in the international community and their quality is guaranteed. Why don't you there have a brave attempt? You will certainly benefit from your wise choice.
Before you decide to buy Omgzlook of Cisco 350-401 Latest Test Camp exam questions, you will have a free part of the questions and answers as a trial. So that you will know the quality of the Omgzlook of Cisco 350-401 Latest Test Camp exam training materials.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Fortinet FCSS_SOC_AN-7.4 - The future is really beautiful, but now, taking a crucial step is even more important! Microsoft PL-200 - Are you an IT staff? Are you enroll in the most popular IT certification exams? If you tell me "yes", then I will tell you a good news that you're in luck. Our company has established a long-term partnership with those who have purchased our Appian ACD100 exam questions. Salesforce PDX-101 - It includes questions and answers, and issimilar with the real exam questions. Besides, the price of our SAP C_TS462_2022-KR learning guide is very favourable even the students can afford it.
Updated: May 28, 2022