Our 350-401 Latest Study Questions study materials are easy to be mastered and boost varied functions. We compile Our 350-401 Latest Study Questions preparation questions elaborately and provide the wonderful service to you thus you can get a good learning and preparation for the 350-401 Latest Study Questions exam. After you know the characteristics and functions of our 350-401 Latest Study Questions training materials in detail, you will definitely love our exam dumps and enjoy the wonderful study experience. Not only that, we also provide the best service and the best 350-401 Latest Study Questions exam torrent to you and we can guarantee that the quality of our product is good. So please take it easy after the purchase and we won’t let your money be wasted. As we know, the 350-401 Latest Study Questions certification is the main reflection of your ability.
CCNP Enterprise 350-401 It is very easy and convenient to use and find.
As the employment situation becoming more and more rigorous, it’s necessary for people to acquire more 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Study Questions skills and knowledge when they are looking for a job. Their masterpieces are instrumental to offer help and improve your performance in the real exam. Being dedicated to these practice materials painstakingly and pooling useful points into our 350-401 Valid Exam Guide exam materials with perfect arrangement and scientific compilation of messages, our 350-401 Valid Exam Guide practice materials can propel the exam candidates to practice with efficiency.
There is an old saying goes, good memory is inferior to sodden ability to write, so we believe that it is a highly productive way for you to memory the knowledge point and review the reference books more effectively. Besides our 350-401 Latest Study Questions exam torrent support free demo download, as we mentioned before, it is an ideal way for you to be fully aware of our 350-401 Latest Study Questions prep guide and then purchasing them if suitable and satisfactory. There is no doubt that among our three different versions of 350-401 Latest Study Questions guide torrent, the most prevalent one is PDF version, and this is particularly suitable and welcomed by youngsters.
Our Cisco 350-401 Latest Study Questions practice quiz is unique in the market.
With the improvement of people’s living standards, there are more and more highly educated people. To defeat other people in the more and more fierce competition, one must demonstrate his extraordinary strength. Today, getting 350-401 Latest Study Questions certification has become a trend, and 350-401 Latest Study Questions exam dump is the best weapon to help you pass certification. We all know that obtaining the 350-401 Latest Study Questions certification is very difficult, and students who want to pass the exam often have to spend a lot of time and energy. After years of hard work, the experts finally developed a set of perfect learning materials 350-401 Latest Study Questions practice materials that would allow the students to pass the exam easily. With our study materials, you only need 20-30 hours of study to successfully pass the exam and reach the peak of your career. What are you waiting for? Come and buy it now.
All intricate points of our 350-401 Latest Study Questions study guide will not be challenging anymore. They are harbingers of successful outcomes.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Cisco 820-605 study guide not only apply to students, but also apply to office workers; not only apply to veterans in the workplace, but also apply to newly recruited newcomers. So our Fortinet FCSS_NST_SE-7.4 latest dumps are highly effective to make use of. Due to lots of same products in the market, maybe you have difficulty in choosing the SAP C_THR70_2404 guide test. SAP C-S43-2022 - They are the versions of the PDF, Software and APP online. So every year a large number of people take SAP C-S4CFI-2402 tests to prove their abilities.
Updated: May 28, 2022