So our IT technicians of Omgzlook take more efforts to study 350-401 Latest Real Exam exam materials. All exam software from Omgzlook is the achievements of more IT elite. Why we give a promise that once you fail the exam with our dump, we guarantee a 100% full refund of the dump cost to you, as all those who have pass the exam successfully with our 350-401 Latest Real Exam exam dumps give us more confidence to make the promise of "No help, full refund". Our company boosts an entire sale system which provides the links to the clients all around the world so that the clients can receive our products timely. Once the clients order our 350-401 Latest Real Exam cram training materials we will send the products quickly by mails. Our Omgzlook devote themselves for years to develop the 350-401 Latest Real Exam exam software to help more people who want to have a better development in IT field to pass 350-401 Latest Real Exam exam.
CCNP Enterprise 350-401 So, act now!
Passing the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Real Exam exam means you might get the chance of higher salary, greater social state and satisfying promotion chance. We know the certificate of 350-401 Latest Exam Questions exam guide is useful and your prospective employer wants to see that you can do the job with strong prove, so our 350-401 Latest Exam Questions study materials could be your opportunity. Our 350-401 Latest Exam Questions practice dumps are sensational from the time they are published for the importance of 350-401 Latest Exam Questions exam as well as the efficiency of our 350-401 Latest Exam Questions training engine.
As everybody knows, competitions appear ubiquitously in current society. In order to live a better live, people improve themselves by furthering their study, as well as increase their professional 350-401 Latest Real Exam skills. With so many methods can boost individual competitiveness, people may be confused, which can really bring them a glamorous work or brighter future? We are here to tell you that a 350-401 Latest Real Exam certification definitively has everything to gain and nothing to lose for everyone.
Cisco 350-401 Latest Real Exam - Other workers are also dedicated to their jobs.
Omgzlook is a website to provide IT certification exam training tool for people who attend IT certification exam examinee. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions. IN a short time of using Omgzlook's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add Omgzlook's training tool in your shopping cart now.
You can click to see the comments of the 350-401 Latest Real Exam exam braindumps and how we changed their life by helping them get the 350-401 Latest Real Exam certification. And you can also see the pass rate of our 350-401 Latest Real Exam learning guide high as 98% to 100%, we can give you a promising future.
350-401 PDF DEMO:
QUESTION NO: 1
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Microsoft SC-400 - These training products to help you pass the exam, we guarantee to refund the full purchase cost. No matter where you are or what you are, EMC D-PSC-DY-23 practice questions promises to never use your information for commercial purposes. SAP C-ARSOR-2404 - but also allows you to pass the exam successfully. Our SAP C_S4CPR_2402 study materials may become your right man. EMC D-ZT-DS-23 - Our training materials have through the test of practice.
Updated: May 28, 2022