We here tell you that there is no need to worry about. Our 350-401 Latest Dumps Ppt actual questions are updated in a high speed. Since the date you pay successfully, you will enjoy the 350-401 Latest Dumps Ppt test guide freely for one year, which can save your time and money. The reality is often cruel. What do we take to compete with other people? More useful certifications like 350-401 Latest Dumps Ppt certificate? In this era of surging talent, why should we stand out among the tens of thousands of graduates and be hired by the company? Perhaps the few qualifications you have on your hands are your greatest asset, and the 350-401 Latest Dumps Ppt test prep is to give you that capital by passing exam fast and obtain certification soon. We are so proud to tell you that according to the statistics from our customers’ feedback, the pass rate among our customers who prepared for the exam with our 350-401 Latest Dumps Ppt test guide have reached as high as 99%, which definitely ranks the top among our peers.
CCNP Enterprise 350-401 Our experts have taken your worries seriously.
The content system of 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Latest Dumps Ppt exam simulation is constructed by experts. Please check it carefully. If you need the invoice, please contact our online workers.
Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of 350-401 Latest Dumps Ppt training questions, you will agree with what I said. What our 350-401 Latest Dumps Ppt study materials contain are all the real questions and answers that will come out in the real exam. As long as you study with our 350-401 Latest Dumps Ppt exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure.
Cisco 350-401 Latest Dumps Ppt - So Omgzlook a website worthy of your trust.
It is known to us that our 350-401 Latest Dumps Ppt study materials have been keeping a high pass rate all the time. There is no doubt that it must be due to the high quality of our study materials. It is a matter of common sense that pass rate is the most important standard to testify the 350-401 Latest Dumps Ppt study materials. The high pass rate of our study materials means that our products are very effective and useful for all people to pass their exam and get the related certification. So if you buy the 350-401 Latest Dumps Ppt study materials from our company, you will get the certification in a shorter time.
350-401 Latest Dumps Ppt study materials including the official Cisco 350-401 Latest Dumps Ppt certification training courses, Cisco 350-401 Latest Dumps Ppt self-paced training guide, 350-401 Latest Dumps Ppt exam Omgzlook and practice, 350-401 Latest Dumps Ppt online exam 350-401 Latest Dumps Ppt study guide. 350-401 Latest Dumps Ppt simulation training package designed by Omgzlook can help you effortlessly pass the exam.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Here are the respective features and detailed disparities of our Palo Alto Networks PCCSE practice materials. PECB ISO-IEC-27001-Lead-Auditor - With it, you will be brimming with confidence, fully to do the exam preparation. We have three packages of the Huawei H20-421_V1.0 study materials: the PDF, Software and APP online and each one of them has its respect and different advantages. Omgzlook Cisco Salesforce Marketing-Cloud-Email-Specialist exam training materials can help IT personnel to achieve this purpose. Buying all our information can guarantee you to pass your first Cisco certification BCS CTFL4 exam.
Updated: May 28, 2022