We can proudly claim that you can successfully pass the exam just on the condition that you study with our 350-401 Intereactive Testing Engine preparation materials for 20 to 30 hours. And not only you will get the most rewards but also you will get an amazing study experience by our 350-401 Intereactive Testing Engine exam questions. For we have three different versions of our 350-401 Intereactive Testing Engine study guide, and you will have different feelings if you have a try on them. Omgzlook is website that can help a lot of IT people realize their dreams. If you have a IT dream， then quickly click the click of Omgzlook. At present, our 350-401 Intereactive Testing Enginestudy materials can give you a ray of hope.
CCNP Enterprise 350-401 So try to trust us.
CCNP Enterprise 350-401 Intereactive Testing Engine - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) You spend lots of time on these reviewing materials you don't know whether it is useful to you, rather than experiencing the service Omgzlook provides for you. Our windows software and online test engine of the Reliable Test 350-401 Simulator Free exam questions are suitable for all age groups. At the same time, our operation system is durable and powerful.
Many times getting a right method is important and more efficient than spending too much time and money in vain. Our Omgzlook team devote themselves to studying the best methods to help you pass 350-401 Intereactive Testing Engine exam certification. From the time when you decide whether to purchase our 350-401 Intereactive Testing Engine exam software or not, we have provided you with comprehensive guarantees, including free demo download before buying, payment guarantee in purchase process, one-year free update service after you purchased 350-401 Intereactive Testing Engine exam software, and full refund guarantee of dump cost if you fail 350-401 Intereactive Testing Engine exam certification, which are all our promises to ensure customer interests.
Cisco 350-401 Intereactive Testing Engine - When choosing a product, you will be entangled.
When people take the subway staring blankly, you can use Pad or cell phone to see the PDF version of the 350-401 Intereactive Testing Engine study materials. While others are playing games online, you can do online 350-401 Intereactive Testing Engine exam questions. We are sure that as you hard as you are, you can pass 350-401 Intereactive Testing Engine exam easily in a very short time. While others are surprised at your achievement, you might have found a better job.
In recent years, the market has been plagued by the proliferation of learning products on qualifying examinations, so it is extremely difficult to find and select our 350-401 Intereactive Testing Engine test questions in many similar products. However, we believe that with the excellent quality and good reputation of our study materials, we will be able to let users select us in many products.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Microsoft AZ-204 - Cisco online test dumps can allow self-assessment test. SAP C_C4H62_2408 - We guarantee that you absolutely don't need to spend extra money to buy other products. We are famous for our high pass-rate SAP C_HRHPC_2405 exam cram. SAP P_SAPEA_2023 - If you really lack experience, you do not know which one to choose. Microsoft DP-600 - Excellent & valid VCE dumps will make you achieve your dream and go to the peak of your life ahead of other peers.
Updated: May 28, 2022