However, if you choose the 350-401 Exam Objectives Pdf exam reference guide from our company, we are willing to help you solve your problem. There are a lot of IT experts in our company, and they are responsible to update the contents every day. If you decide to buy our 350-401 Exam Objectives Pdf study question, we can promise that we will send you the latest information every day. The most notable feature of our 350-401 Exam Objectives Pdf learning quiz is that they provide you with the most practical solutions to help you learn the exam points of effortlessly and easily, then mastering the core information of the certification course outline. Their quality of our 350-401 Exam Objectives Pdf study guide is much higher than the quality of any other materials, and questions and answers of 350-401 Exam Objectives Pdf training materials contain information from the best available sources. By simulating enjoyable learning scenes and vivid explanations, users will have greater confidence in passing the qualifying exams.
CCNP Enterprise 350-401 It absolutely has no problem.
Watch carefully you will find that more and more people are willing to invest time and energy on the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Objectives Pdf exam, because the exam is not achieved overnight, so many people are trying to find a suitable way. What is more, there are extra place for you to make notes below every question of the 350-401 Valid Exam Dumps practice quiz. Don't you think it is quite amazing? Just come and have a try!
Our users are willing to volunteer for us. You can imagine this is a great set of 350-401 Exam Objectives Pdf learning guide! Next, I will introduce you to the most representative advantages of 350-401 Exam Objectives Pdf real exam.
Cisco 350-401 Exam Objectives Pdf test question will change your perception.
Our 350-401 Exam Objectives Pdf exam prep will give you a complete after-sales experience. You can consult online no matter what problems you encounter. You can get help anywhere, anytime in our 350-401 Exam Objectives Pdf test material. 350-401 Exam Objectives Pdf test questions have very high quality services in addition to their high quality and efficiency. If you use 350-401 Exam Objectives Pdf test material, you will have a very enjoyable experience while improving your ability. We have always advocated customer first. If you use our learning materials to achieve your goals, we will be honored. 350-401 Exam Objectives Pdf exam prep look forward to meeting you.
At the same time, we have formed a group of passionate researchers and experts, which is our great motivation of improvement. Every once in a while we will release the new version study materials.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 2
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 3
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Citrix 1Y0-204 - I hope that you can spend a little time understanding what our study materials have to attract customers compared to other products in the industry. In addition, the Microsoft PL-600 study dumps don’t occupy the memory of your computer. Therefore, we believe that you will never regret to use the PDMA NPDP exam dumps. There may be a lot of people feel that the preparation process for IIA IIA-CHAL-QISA exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. So there is nothing to worry about, just buy our Salesforce Salesforce-Loyalty-Management exam questions.
Updated: May 28, 2022