Our three versions of 350-401 Exam Lab Questions study materials are the PDF, Software and APP online. They have their own advantages differently and their prolific 350-401 Exam Lab Questions practice materials can cater for the different needs of our customers, and all these 350-401 Exam Lab Questions simulating practice includes the new information that you need to know to pass the test for we always update it in the first time. So you can choose them according to your personal preference. Also, we will accept annual inspection of our 350-401 Exam Lab Questions exam simulation from authority. The results show that our 350-401 Exam Lab Questions study materials completely have no problem. Therefore, with our 350-401 Exam Lab Questions study materials, you can easily find the key content of the exam and review it in a targeted manner so that you can successfully pass the 350-401 Exam Lab Questions exam.
CCNP Enterprise 350-401 They compile each answer and question carefully.
Our Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Lab Questions exam question bank is produced by Omgzlook's experts's continuously research of outline and previous exam. We sincerely hope that you can achieve your dream in the near future by the Valid 350-401 Exam Bootcamp latest questions of our company. There are a lot of experts and professors in or company in the field.
We can let you spend a small amount of time and money and pass the IT certification exam at the same time. Selecting the products of Omgzlook to help you pass your first time Cisco certification 350-401 Exam Lab Questions exam is very cost-effective. Omgzlook provide a good after-sales service for all customers.
Cisco 350-401 Exam Lab Questions - The rate of return will be very obvious for you.
The society has an abundance of capable people and there is a keen competition. Don't you feel a lot of pressure? No matter how high your qualifications, it does not mean your strength forever. Qualifications is just a stepping stone, and strength is the cornerstone which can secure your status. Cisco 350-401 Exam Lab Questions certification exam is a popular IT certification, and many people want to have it. With it you can secure your career. Omgzlook's Cisco 350-401 Exam Lab Questions exam training materials is a good training tool. It can help you pass the exam successfully. With this certification, you will get international recognition and acceptance. Then you no longer need to worry about being fired by your boss.
Next, through my introduction, I hope you can have a deeper understanding of our 350-401 Exam Lab Questions learning quiz. We really hope that our 350-401 Exam Lab Questions practice engine will give you some help.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
Microsoft DP-100 - So you have to seize this opportunity of Omgzlook. EMC D-SNC-DY-00 - At home, you can use the computer and outside you can also use the phone. IBM C1000-174 - The high quality exam dumps can produce a wonderful effect. ISC SSCP - There are no additional ads to disturb the user to use the Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) qualification question. Would you like to register Cisco Netskope NSK101 certification test? Would you like to obtain Netskope NSK101 certificate? Without having enough time to prepare for the exam, what should you do to pass your exam? In fact, there are techniques that can help.
Updated: May 28, 2022