our advanced operation system on the 350-401 Exam Guide Materials learning guide will automatically encrypt all of the personal information on our 350-401 Exam Guide Materials practice dumps of our buyers immediately, and after purchasing, it only takes 5 to 10 minutes before our operation system sending our 350-401 Exam Guide Materials study materials to your email address, there is nothing that you need to worry about, and we will spear no effort to protect your interests from any danger and ensure you the fastest delivery. We provide 24/7 customer service for all of you, please feel free to send us any questions about Cisco exam test through email or online chat, and we will always try our best to keeping our customer satisfied. 350-401 Exam Guide Materials study material will give you a better way to prepare for the actual test with its validity and reliability 350-401 Exam Guide Materials questions & answers. Believe us because the 350-401 Exam Guide Materials test prep are the most useful and efficient, and the 350-401 Exam Guide Materials exam preparation will make you master the important information and the focus of the exam.
CCNP Enterprise 350-401 They will mitigate your chance of losing.
You can learn some authentic knowledge with our high accuracy and efficiency 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Exam Guide Materials simulating questions and help you get authentic knowledge of the exam. At the same time, if you have problems with downloading and installing, Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) torrent prep also has dedicated staff that can provide you with remote online guidance. In order to allow you to use our products with confidence, 350-401 Test Tutorial test guide provide you with a 100% pass rate guarantee.
With our 350-401 Exam Guide Materials study materials, all your agreeable outcomes are no longer dreams for you. And with the aid of our 350-401 Exam Guide Materials exam preparation to improve your grade and change your states of life and get amazing changes in career, everything is possible. It all starts from our 350-401 Exam Guide Materials learning questions.
Cisco 350-401 Exam Guide Materials - As the saying goes, Rome is not build in a day.
In order to facilitate the wide variety of users' needs the 350-401 Exam Guide Materials study guide have developed three models with the highest application rate in the present - PDF, software and online. No matter you are a student, a office staff or even a housewife, you can always find your most situable way to study our 350-401 Exam Guide Materials exam Q&A. Generally speaking, these three versions of our 350-401 Exam Guide Materials learning guide can support study on paper, computer and all kinds of eletronic devices. They are quite convenient.
The 350-401 Exam Guide Materials latest dumps will be a shortcut for a lot of people who desire to be the social elite. If you try your best to prepare for the 350-401 Exam Guide Materials exam and get the related certification in a short time, it will be easier for you to receive the attention from many leaders of the big company, and it also will be very easy for many people to get a decent job in the labor market by the 350-401 Exam Guide Materials learning guide.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Our Fortinet FCSS_SOC_AN-7.4 learning materials provide you with a platform of knowledge to help you achieve your wishes. According to the survey of our company, we have known that a lot of people hope to try the SAP C_THR95_2405 test training materials from our company before they buy the study materials, because if they do not have a try about our study materials, they cannot sure whether the study materials from our company is suitable for them to prepare for the exam or not. In 21st century, every country had entered the period of talent competition, therefore, we must begin to extend our SAP C_S4CPR_2402 personal skills, only by this can we become the pioneer among our competitors. All the experts in our company are devoting all of their time to design the best SAP C_THR82_2405test question for all people. IBM S2000-020 - You can see the high pass rate as 98% to 100%, which is unmarched in the market.
Updated: May 28, 2022