We will update the content of 350-401 Certification Exam Cost test guide from time to time according to recent changes of examination outline and current policies, so that every examiner can be well-focused and complete the exam focus in the shortest time. Besides, our 350-401 Certification Exam Cost exam questions can help you optimize your learning method by simplifying obscure concepts so that you can master better. One more to mention, with our 350-401 Certification Exam Cost test guide, there is no doubt that you can cut down your preparing time in 20-30 hours of practice before you take the exam. All real questions just need to practice one or two days and remember the answers will save you much time in 350-401 Certification Exam Cost real exam. Come and join us. As long as you pay at our platform, we will deliver the relevant 350-401 Certification Exam Cost exam materials to your mailbox within the given time.
CCNP Enterprise 350-401 So they are dependable.
You can free download the demos which are part of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certification Exam Cost exam braindumps, you will find that how good they are for our professionals devote of themselves on compiling and updating the most accurate content of our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Certification Exam Cost exam questions. Our experts have experience of the exam for over ten years. So our Dumps 350-401 Vce practice materials are their masterpiece full of professional knowledge and sophistication to cope with the Dumps 350-401 Vce exam.
Secondly you could look at the free demos to see if the questions and the answers are valuable. You only need to fill in your mail address and you could download the demos immediately. So you could understand the quality of our 350-401 Certification Exam Cost certification file.
Cisco 350-401 Certification Exam Cost - You will never come across system crashes.
The content system of 350-401 Certification Exam Cost exam simulation is constructed by experts. After-sales service of our study materials is also provided by professionals. If you encounter some problems when using our 350-401 Certification Exam Cost study materials, you can also get them at any time. After you choose 350-401 Certification Exam Cost preparation questions, professional services will enable you to use it in the way that suits you best, truly making the best use of it, and bringing you the best learning results.
When the interface displays that you have successfully paid for our 350-401 Certification Exam Cost study materials, our specific online sales workers will soon deal with your orders. You will receive the 350-401 Certification Exam Cost study materials no later than ten minutes.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
As long as you study with our SASInstitute A00-470 exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure. EMC D-NWR-DY-23 - These professional knowledge will become a springboard for your career, help you get the favor of your boss, and make your career reach it is peak. Oracle 1z0-915-1 - And if you don't believe that, you can free download the demos to have a check before payment. We can be sure that with the professional help of our Microsoft PL-500 test guide you will surely get a very good experience. ASQ CQE-KR - The comprehensive coverage would be beneficial for you to pass the exam.
Updated: May 28, 2022