That helping you pass the 350-401 Accurate Prep Material exam successfully has been given priority to our agenda. In today’s society, there are increasingly thousands of people put a priority to acquire certificates to enhance their abilities. With a total new perspective, 350-401 Accurate Prep Material study materials have been designed to serve most of the office workers who aim at getting an exam certification. Our brand has marched into the international market and many overseas clients purchase our 350-401 Accurate Prep Material exam dump online. As the saying goes, Rome is not build in a day. No matter you are a student, a office staff or even a housewife, you can always find your most situable way to study our 350-401 Accurate Prep Material exam Q&A.
CCNP Enterprise 350-401 You can consult our staff online.
In the annual examination questions, our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Accurate Prep Material study questions have the corresponding rules to summarize, and can accurately predict this year's test hot spot and the proposition direction. They can greatly solve your problem-solving abilities. Actually our 350-401 Valid Study Questions Ppt study materials cover all those traits and they are your prerequisites for successful future.
Highlight a person's learning effect is not enough, because it is difficult to grasp the difficulty of testing, a person cannot be effective information feedback, in order to solve this problem, our 350-401 Accurate Prep Material real exam materials provide a powerful platform for users, allow users to exchange of experience. Here, the all users of our 350-401 Accurate Prep Material learning reference files can through own id to login to the platform, realize the exchange and sharing with other users, even on the platform and more users to become good friends, encourage each other, to deal with the difficulties encountered in the process of preparation each other. Our 350-401 Accurate Prep Material learning reference files not only provide a single learning environment for users, but also create a learning atmosphere like home, where you can learn and communicate easily.
Cisco 350-401 Accurate Prep Material - Your exam results will help you prove this!
With the most scientific content and professional materials 350-401 Accurate Prep Material preparation materials are indispensable helps for your success. Such a valuable acquisition priced reasonably of our 350-401 Accurate Prep Material study guide is offered before your eyes, you can feel assured to take good advantage of. And we give some discounts from time to time on our 350-401 Accurate Prep Material exam questions for promoting. If you come to visit our website more times, you will buy our 350-401 Accurate Prep Material practice engine at a more favorable price.
Our 350-401 Accurate Prep Material test torrent is of high quality, mainly reflected in the pass rate. As for our 350-401 Accurate Prep Material study tool, we guarantee our learning materials have a higher passing rate than that of other agency.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 3
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Materials trends are not always easy to forecast on our study guide, but they have predictable pattern for them by ten-year experience who often accurately predict points of knowledge occurring in next Salesforce Advanced-Administrator preparation materials. And they are trained specially and professionlly to know every detail about our HP HPE0-S59 learning prep. We have been always trying to make every effort to consolidate and keep a close relationship with customer by improving the quality of our ISC CISSP-KR practice materials. DAMA CDMP-RMD - High accuracy and high quality are the reasons why you should choose us. Let us take a try of our amazing SAP C_C4H320_34 exam questions and know the advantages first!
Updated: May 28, 2022