What are you waiting now? Just rush to buy our 200-301 Vce Test Simulator study guide! If you buy the 200-301 Vce Test Simulator practice materials within one year you can enjoy free updates. Being the most competitive and advantageous company in the market, our 200-301 Vce Test Simulator exam questions have help tens of millions of exam candidates, realized their dreams all these years. With our high pass rate as 98% to 100%, which is provided and tested by our worthy customers, you will be encouraged to overcome the lack of confidence and establish your determination to pass 200-301 Vce Test Simulator exam. We take the leader position in the career of assisting the candidates in passing their 200-301 Vce Test Simulator exams and gaining their dreaming certifications. The passing rate of our 200-301 Vce Test Simulator exam materials are very high and about 99% and so usually the client will pass the exam successfully.
CCNA 200-301 Moreover, we have Demos as freebies.
CCNA 200-301 Vce Test Simulator - Cisco Certified Network Associate Exam Though the content of these three versions is the same, the displays have their different advantages. We believe that you will like our products. According to the different demands from customers, the experts and professors designed three different versions for all customers.
As we will find that, get the test 200-301 Vce Test Simulator certification, acquire the qualification of as much as possible to our employment effect is significant. But how to get the test 200-301 Vce Test Simulator certification didn't own a set of methods, and cost a lot of time to do something that has no value. With our 200-301 Vce Test Simulator exam Practice, you will feel much relax for the advantages of high-efficiency and accurate positioning on the content and formats according to the candidates’ interests and hobbies.
Cisco 200-301 Vce Test Simulator - Just be confident to face new challenge!
As we enter into such a competitive world, the hardest part of standing out from the crowd is that your skills are recognized then you will fit into the large and diverse workforce. The 200-301 Vce Test Simulator certification is the best proof of your ability. However, it’s not easy for those work officers who has less free time to prepare such an 200-301 Vce Test Simulator exam. Here comes 200-301 Vce Test Simulator exam materials which contain all of the valid 200-301 Vce Test Simulator study questions. You will never worry about the 200-301 Vce Test Simulator exam.
Not only we offer the best 200-301 Vce Test Simulator training prep, but also our sincere and considerate attitude is praised by numerous of our customers. To cope with the fast growing market, we will always keep advancing and offer our clients the most refined technical expertise and excellent services about our 200-301 Vce Test Simulator exam questions.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
Our company committed all versions of IBM S1000-007 practice materials attached with free update service. You will come across almost all similar questions in the real Salesforce B2C-Commerce-Architect exam. So prepared to be amazed by our Microsoft DP-900-KR learning guide! If you are preparing for the exam by the guidance of the SAP C-HAMOD-2404 study practice question from our company and take it into consideration seriously, you will absolutely pass the exam and get the related certification. With our SAP C_THR12_2311 study guide, not only that you can pass you exam easily and smoothly, but also you can have a wonderful study experience based on the diversed versions of our SAP C_THR12_2311 training prep.
Updated: May 28, 2022