We believe if you compare our 200-301 Vce Exam Simulator training guide with the others, you will choose ours at once. Our 200-301 Vce Exam Simulator study materials have a professional attitude at the very beginning of its creation. The series of 200-301 Vce Exam Simulator measures we have taken is also to allow you to have the most professional products and the most professional services. As we know, our products can be recognized as the most helpful and the greatest 200-301 Vce Exam Simulator study engine across the globe. Even though you are happy to hear this good news, you may think our price is higher than others. What are you waiting for?
CCNA 200-301 So our customers can pass the exam with ease.
Our APP online version of 200-301 - Cisco Certified Network Associate Exam Vce Exam Simulator exam questions has the advantage of supporting all electronic equipment. Therefore, we have provided three versions of Online 200-301 Lab Simulation practice guide: the PDF, the Software and the APP online. You can choose according to your actual situation.
We believe that our 200-301 Vce Exam Simulator learning engine will meet your all needs. Please give us a chance to service you; you will be satisfied with our training prep. Our 200-301 Vce Exam Simulator preparation exam will be very useful for you if you are going to take the exam.
Cisco 200-301 Vce Exam Simulator - Finding a good paying job is available for you.
Our PDF version of 200-301 Vce Exam Simulator training materials is legible to read and remember, and support printing request. Software version of 200-301 Vce Exam Simulator practice materials supports simulation test system, and give times of setup has no restriction. Remember this version support Windows system users only. App online version of 200-301 Vce Exam Simulator exam questions is suitable to all kinds of equipment or digital devices and supportive to offline exercise on the condition that you practice it without mobile data.
They will thank you so much. Our company never sets many restrictions to the 200-301 Vce Exam Simulator exam question.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 5
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
Get the test ISACA CISA-KR certification is not achieved overnight, we need to invest a lot of time and energy to review, and the review process is less a week or two, more than a month or two, or even half a year, so ISACA CISA-KR exam questions are one of the biggest advantage is that it is the most effective tools for saving time for users. As long as you encounter obstacles in the learning process on our Microsoft PL-500 training guide, send us an email and we will solve it for you at the first time. Our Network Appliance NS0-521 practice materials are updating according to the precise of the real exam. With the help of our ISQI CPSA-FL exam questions, your review process will no longer be full of pressure and anxiety. If you have problems in the process of using our Avaya 71801X study questions, as long as you contact us anytime and anywhere, we will provide you with remote assistance until that all the problems on our Avaya 71801X exam braindumps are solved.
Updated: May 28, 2022