Therefore, when you are ready to review the exam, you can fully trust our products, choose our learning materials. If you don't want to miss out on such a good opportunity, buy it quickly. Thus, users do not have to worry about such trivial issues as typesetting and proofreading, just focus on spending the most practice to use our 200-301 Valid Test Sample learning materials. We believe that our 200-301 Valid Test Sample test torrent can help you improve yourself and make progress beyond your imagination. If you buy our 200-301 Valid Test Sample study torrent, we can make sure that our study materials will not be let you down. You also can become the lucky guys as long as you are willing to learn.
CCNA 200-301 So you can take a best preparation for the exam.
CCNA 200-301 Valid Test Sample - Cisco Certified Network Associate Exam Please have a try and give us an opportunity. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
Our 200-301 Valid Test Sample study materials absolutely can add more pleasure to your life. You just need a chance to walk out. You can click to see the comments of the 200-301 Valid Test Sample exam braindumps and how we changed their life by helping them get the 200-301 Valid Test Sample certification.
Cisco 200-301 Valid Test Sample - So you have no reason not to choose it.
Each of us is dreaming of being the best, but only a few people take that crucial step. The key step is to work hard to make yourself better. Our 200-301 Valid Test Sample study materials may become your right man. Perhaps you have heard of our 200-301 Valid Test Sample exam braindumps. A lot of our loyal customers are very familiar with their characteristics. And our 200-301 Valid Test Sample learning quiz have become a very famous brand in the market and praised for the best quality.
You can enjoy the treatment of high-level white-collar, and you can carve out a new territory in the internation. Are you still worried about your exam? Omgzlook's Cisco 200-301 Valid Test Sample exam training materials will satisfy your desire.
200-301 PDF DEMO:
QUESTION NO: 1
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
We are constantly improving and just want to give you the best PMI PMP-KR learning braindumps. APMG-International AgilePM-Practitioner - It will help us to pass the exam successfully. As long as you use EC-COUNCIL 312-38 learning materials and get a EC-COUNCIL 312-38 certificate, you will certainly be appreciated by the leaders. Pegasystems PEGACPSSA23V1 - If you are an IT staff, it will be your indispensable training materials. The system of VMware 2V0-41.23 test guide will keep track of your learning progress in the whole course.
Updated: May 28, 2022