Although some of the hard copy materials contain mock examination papers, they do not have the automatic timekeeping system. Therefore, it is difficult for them to bring the students into a real test state. With 200-301 Unlimited Exam Practice exam guide, you can perform the same computer operations as the real exam, completely taking you into the state of the actual exam, which will help you to predict the problems that may occur during the exam, and let you familiarize yourself with the exam operation in advance and avoid rushing during exams. To those time-sensitive exam candidates, our high-efficient 200-301 Unlimited Exam Practice study questions comprised of important news will be best help. To go with the changing neighborhood, we need to improve our efficiency of solving problems as well as the new contents of our 200-301 Unlimited Exam Practice exam questions accordingly, so all points are highly fresh about in compliance with the syllabus of the exam. What are you still hesitating for? Hurry to buy our 200-301 Unlimited Exam Practice learning engine now!
CCNA 200-301 It can help a lot of people achieve their dream.
To some extent, these 200-301 - Cisco Certified Network Associate Exam Unlimited Exam Practice certificates may determine your future. There a galaxy of talents in the 21st century, but professional IT talents not so many. Society need a large number of professional IT talents.
There are so many success examples by choosing our 200-301 Unlimited Exam Practice guide quiz, so we believe you can be one of them. Our 200-301 Unlimited Exam Practice exam questions will be the easiest access to success without accident for you. Besides, we are punctually meeting commitments to offer help on 200-301 Unlimited Exam Practice study materials.
More and more people choose Cisco Cisco 200-301 Unlimited Exam Practice exam.
If you require any further information about either our 200-301 Unlimited Exam Practice preparation exam or our corporation, please do not hesitate to let us know. High quality 200-301 Unlimited Exam Practice practice materials leave a good impression on the exam candidates and bring more business opportunities in the future. And many of our cutomers use our 200-301 Unlimited Exam Practice exam questions as their exam assistant and establish a long cooperation with us.
Our Cisco 200-301 Unlimited Exam Practice exam training materials contains questions and answers. Our experienced team of IT experts through their own knowledge and experience continue to explore the exam information.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
We assume all the responsibilities our ISACA CISA-CN simulating practice may bring you foreseeable outcomes and you will not regret for believing in us assuredly. SAP C_BW4H_2404 - Omgzlook is a professional IT certification sites, the certification success rate is 100%. Perhaps you haven't heard of our company's brand yet, although we are becoming a leader of WGU Principles-of-Management exam questions in the industry. Juniper JN0-1103 - And our price is absolutely reasonable and suitable for each of the candidates who participating in the IT certification exams. And this version also helps establish the confidence of the candidates when they attend the CompTIA PT0-002 exam after practicing.
Updated: May 28, 2022