It focuses on the most advanced Cisco 200-301 Reliable Test Testking for the majority of candidates. With Omgzlook, you no longer need to worry about the Cisco 200-301 Reliable Test Testking exam. Omgzlook exam questions have good quality and good service. And we keep ameliorate our 200-301 Reliable Test Testking latest material according to requirements of 200-301 Reliable Test Testking exam. Besides, we arranged our 200-301 Reliable Test Testking exam prep with clear parts of knowledge. Within a year, we provide free updates.
CCNA 200-301 If you feel exam is a headache, don't worry.
CCNA 200-301 Reliable Test Testking - Cisco Certified Network Associate Exam Of course, with studying hard, you can pass the exam. We sincerely encourage you to challenge yourself as long as you have the determination to study new knowledge. Our 200-301 Reliable Exam Camp Pdf exam material is full of useful knowledge, which can strengthen your capacity for work.
If you are concerned about the test, however, you can choose Omgzlook's Cisco 200-301 Reliable Test Testking exam training materials. No matter how low your qualifications, you can easily understand the content of the training materials. And you can pass the exam successfully.
Cisco 200-301 Reliable Test Testking - Our products are just suitable for you.
Omgzlook is a website to provide a targeted training for Cisco certification 200-301 Reliable Test Testking exam. Omgzlook is also a website which can not only make your expertise to get promoted, but also help you pass Cisco certification 200-301 Reliable Test Testking exam for just one time. The training materials of Omgzlook are developed by many IT experts' continuously using their experience and knowledge to study, and the quality is very good and have very high accuracy. Once you select our Omgzlook, we can not only help you pass Cisco certification 200-301 Reliable Test Testking exam and consolidate their IT expertise, but also have a one-year free after-sale Update Service.
You will get your 200-301 Reliable Test Testking certification with little time and energy by the help of out dumps. Omgzlook is constantly updated in accordance with the changing requirements of the Cisco certification.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 4
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 5
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
SAP E-ACTAI-2403 - If you buy the Omgzlook's products, we will not only spare no effort to help you pass the certification exam, but also provide a free update and upgrade service. As we all know, it is not an easy thing to gain the SAP C_TS4FI_2023 certification. In order to meet the demand of most of the IT employees, Omgzlook's IT experts team use their experience and knowledge to study the past few years Cisco certification SAP C-TS4CO-2023 exam questions. Our dumps collection will save you much time and ensure you get high mark in California Department of Insurance CA-Life-Accident-and-Health actual test with less effort. Microsoft MB-230 - Our questions and answers will not only allow you effortlessly through the exam first time, but also can save your valuable time.
Updated: May 28, 2022