We are sure about "pass Guaranteed" & "Money Back Guaranteed" so that you can feel safe and worry-free on our website. If you want to study 200-301 Reliable Test Review certification exam and plan to pass exam one shot, Omgzlook exam braindumps will be your best assist. Purchasing valid 200-301 Reliable Test Review exam dumps is not a cheap thing for some candidates in the internet since there is so much different advertisement. It is unmarched high as 98% to 100%. So choose our 200-301 Reliable Test Review practice engine, you are more confident to pass. Chance favors the prepared mind.
The way to pass the 200-301 Reliable Test Review actual test is diverse.
It is known to us that practicing the incorrect questions is very important for everyone, so our 200-301 - Cisco Certified Network Associate Exam Reliable Test Review exam question provide the automatic correcting system to help customers understand and correct the errors. 200-301 Valid Practice Test Fee online test engine can simulate the actual test, which will help you familiar with the environment of the 200-301 Valid Practice Test Fee real test. The 200-301 Valid Practice Test Fee self-assessment features can bring you some convenience.
All 200-301 Reliable Test Review training engine can cater to each type of exam candidates’ preferences. Our 200-301 Reliable Test Review practice materials call for accuracy legibility and high quality, so 200-301 Reliable Test Review study braindumps are good sellers and worth recommendation for their excellent quality. The three versions of our 200-301 Reliable Test Review exam questions are PDF & Software & APP version for your information.
Cisco 200-301 Reliable Test Review - It is so cool even to think about it.
In this highly competitive modern society, everyone needs to improve their knowledge level or ability through various methods so as to obtain a higher social status. Under this circumstance passing 200-301 Reliable Test Review exam becomes a necessary way to improve oneself. And you are lucky to find us for we are the most popular vendor in this career and have a strong strength on providing the best 200-301 Reliable Test Review study materials. And the price of our 200-301 Reliable Test Review practice engine is quite reasonable.
The easy language does not pose any barrier for any learner. The complex portions of the 200-301 Reliable Test Review certification syllabus have been explained with the help of simulations and real-life based instances.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 3
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
We have helped tens of thousands of our customers achieve their certification with our excellent Microsoft DP-900-KR exam braindumps. Now, I am glad to introduce a secret weapon for all of the candidates to pass the exam as well as get the related certification without any more ado-- our Palo Alto Networks PCNSA study braindumps. Maybe you still have doubts about our AAPC CPC exam braindumps. Our high-quality Google Professional-Machine-Learning-Engineer} learning guide help the students know how to choose suitable for their own learning method, our Google Professional-Machine-Learning-Engineer study materials are a very good option. As is known to us, there are best sale and after-sale service of the IBM C1000-156 certification training dumps all over the world in our company.
Updated: May 28, 2022