So our 200-301 Reliable Exam Registration exam questions are real-exam-based and convenient for the clients to prepare for the exam. Our Cisco Certified Network Associate Exam study question is compiled and verified by the first-rate experts in the industry domestically and they are linked closely with the real exam. Our products’ contents cover the entire syllabus of the exam and refer to the past years’ exam papers. Besides, the pass rate of our 200-301 Reliable Exam Registration exam questions are unparalled high as 98% to 100%, you will get success easily with our help. There are so many features to show that our 200-301 Reliable Exam Registration study guide surpasses others. However, the exam is very difficult for a lot of people.
CCNA 200-301 So people are different from the past.
Our service staff will help you solve the problem about the 200-301 - Cisco Certified Network Associate Exam Reliable Exam Registration training materials with the most professional knowledge and enthusiasm. There is a linkage given by our e-mail, and people can begin their study right away after they have registered in. Our 200-301 New APP Simulations study materials are available for downloading without any other disturbing requirements as long as you have paid successfully, which is increasingly important to an examinee as he or she has limited time for personal study.
Our 200-301 Reliable Exam Registration exam quiz is so popular not only for the high quality, but also for the high efficiency services provided which owns to the efforts of all our staffs. First of all, if you are not sure about the 200-301 Reliable Exam Registration exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy 200-301 Reliable Exam Registration study guide or not.
Cisco 200-301 Reliable Exam Registration - They compile each answer and question carefully.
Omgzlook is a website which is able to speed up your passing the Cisco certification 200-301 Reliable Exam Registration exams. Our Cisco certification 200-301 Reliable Exam Registration exam question bank is produced by Omgzlook's experts's continuously research of outline and previous exam. When you are still struggling to prepare for passing the Cisco certification 200-301 Reliable Exam Registration exams, please choose Omgzlook's latest Cisco certification 200-301 Reliable Exam Registration exam question bank, and it will brings you a lot of help.
They tried their best to design the best 200-301 Reliable Exam Registration certification training dumps from our company for all people. By our study materials, all people can prepare for their 200-301 Reliable Exam Registration exam in the more efficient method.
200-301 PDF DEMO:
QUESTION NO: 1
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 2
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
Splunk SPLK-1002 - We can let you spend a small amount of time and money and pass the IT certification exam at the same time. If you do not receive our SAP C_S4CFI_2402 study materials, please contact our online workers. Omgzlook has more than 10 years experience in IT certification APICS CSCP-KR exam training, including questions and answers. In fact, all of the three versions of the SAP C-TS414-2023 practice prep are outstanding. SAP C-WZADM-2404 - Omgzlook can give you a brighter future.
Updated: May 28, 2022