So customer orientation is the beliefs we honor. Our 200-301 Latest Exam Syllabus practice materials from our company are invulnerable. And we are consigned as the most responsible company in this area. Our test bank provides all the questions which may appear in the real exam and all the important information about the exam. You can use the practice test software to test whether you have mastered the Cisco Certified Network Associate Exam test practice dump and the function of stimulating the exam to be familiar with the real exam’s pace, atmosphere and environment. Besides, the pass rate of our 200-301 Latest Exam Syllabus exam questions are unparalled high as 98% to 100%, you will get success easily with our help.
CCNA 200-301 However, you must believe that this is true!
CCNA 200-301 Latest Exam Syllabus - Cisco Certified Network Associate Exam This greatly improves the students' availability of fragmented time. When you want to correct the answer after you finish learning, the correct answer for our 200-301 Free Vce Dumps test prep is below each question, and you can correct it based on the answer. In addition, we design small buttons, which can also show or hide the 200-301 Free Vce Dumps exam torrent, and you can flexibly and freely choose these two modes according to your habit.
Once you choose our learning materials, your dream that you have always been eager to get Cisco certification which can prove your abilities will realized. You will have more competitive advantages than others to find a job that is decent. We are convinced that our 200-301 Latest Exam Syllabus exam questions can help you gain the desired social status and thus embrace success.
Our Cisco 200-301 Latest Exam Syllabus study materials are designed carefully.
We offer 24 - hour, 365 – day online customer service to every user on our 200-301 Latest Exam Syllabus study materials. Our service staff will help you solve the problem about the 200-301 Latest Exam Syllabus training materials with the most professional knowledge and enthusiasm. We believe that can completely dispel your worries on 200-301 Latest Exam Syllabus exam braindumps. So please feel free to contact us if you have any trouble on our 200-301 Latest Exam Syllabus practice questions.
The immediate downloading feature of our 200-301 Latest Exam Syllabus study materials is an eminent advantage of our products. Once the pay is done, our customers will receive an e-mail from our company.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
First of all, if you are not sure about the Network Appliance NS0-014 exam, the online service will find the most accurate and all-sided information for you, so that you can know what is going on about all about the exam and make your decision to buy Network Appliance NS0-014 study guide or not. Lpi 201-450 - Omgzlook's providing learning materials can not only help you 100% pass the exam, but also provide you a free one-year update service. After the clients use our ACAMS CAMS-CN prep guide dump if they can’t pass the test smoothly they can contact us to require us to refund them in full and if only they provide the failure proof we will refund them at once. Symantec 250-586 - Our solution can 100% guarantee you to pass the exam, and also provide you with a one-year free update service. The success of our PECB ISO-IEC-27001-Lead-Implementer latest exam file cannot be separated from their painstaking efforts.
Updated: May 28, 2022