It is a popular belief that only processional experts can be the leading one to do some adept job. And similarly, only high quality and high accuracy 200-301 Exam Vce Free exam questions like ours can give you confidence and reliable backup to get the certificate smoothly because our experts have extracted the most frequent-tested points for your reference. Good practice materials like our Cisco Certified Network Associate Exam study question can educate exam candidates with the most knowledge. For all content of our 200-301 Exam Vce Free learning materials are strictly written and tested by our customers as well as the market. Come to try and you will be satisfied! So do not splurge time on searching for the perfect practice materials, because our 200-301 Exam Vce Free guide materials are exactly what you need to have.
CCNA 200-301 We strongly advise you to have a brave attempt.
200-301 - Cisco Certified Network Associate Exam Exam Vce Free exam questions promise that if you fail to pass the exam successfully after purchasing our product, we are willing to provide you with a 100% full refund. It is time for you to plan your life carefully. After all, you have to make money by yourself.
We will send our 200-301 Exam Vce Free exam question in 5-10 minutes after their payment. Because the most clients may be busy in their jobs or other significant things, the time they can spare to learn our 200-301 Exam Vce Free learning guide is limited and little. But if the clients buy our 200-301 Exam Vce Free training quiz they can immediately use our product and save their time.
Cisco 200-301 Exam Vce Free - We guarantee you 100% certified.
When you decide to pass the 200-301 Exam Vce Free exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. That is the reason why I want to recommend our 200-301 Exam Vce Free prep guide to you, because we believe this is what you have been looking for. Moreover we are committed to offer you with data protect act and guarantee you will not suffer from virus intrusion and information leakage after purchasing our 200-301 Exam Vce Free guide torrent. The last but not least we have professional groups providing guidance in terms of download and installment remotely.
If you also have a IT dream, quickly put it into reality. Select Omgzlook's Cisco 200-301 Exam Vce Free exam training materials, and it is absolutely trustworthy.
200-301 PDF DEMO:
QUESTION NO: 1
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 2
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
WGU Cybersecurity-Architecture-and-Engineering - You may try it! Salesforce MuleSoft-Integration-Associate - With it, you will pass the exam easily. IIA IIA-CIA-Part2-KR - Our product is of high quality and the passing rate and the hit rate are both high. Even if you spend a small amount of time to prepare for SAP C-SIGDA-2403 certification, you can also pass the exam successfully with the help of Omgzlook Cisco SAP C-SIGDA-2403 braindump. We treat it as our major responsibility to offer help so our Salesforce Interaction-Studio-Accredited-Professional practice guide can provide so much help, the most typical one is their efficiency.
Updated: May 28, 2022