There is an old saying goes, the customer is king, so we follow this principle with dedication to achieve high customer satisfaction on our 200-301 Exam Topics Pdf exam questions. First of all, you are able to make full use of our 200-301 Exam Topics Pdf learning dumps through three different versions: PDF, PC and APP online version. For each version, there is no limit and access permission if you want to download our 200-301 Exam Topics Pdfstudy materials, and it really saves a lot of time for it is fast and convenient. We understand your drive of the 200-301 Exam Topics Pdf certificate, so you have a focus already and that is a good start. The sources and content of our 200-301 Exam Topics Pdf practice materials are all based on the real exam. It is estimated conservatively that the passing rate of the exam is over 98 percent with our 200-301 Exam Topics Pdf study materials as well as considerate services.
CCNA 200-301 You will not need to struggle with the exam.
Nowadays, having knowledge of the 200-301 - Cisco Certified Network Associate Exam Exam Topics Pdf study braindumps become widespread, if you grasp solid technological knowledge, you are sure to get a well-paid job and be promoted in a short time. Most of the materials on the market do not have a free trial function. Even some of the physical books are sealed up and cannot be read before purchase.
More detailed information is under below. We are pleased that you can spare some time to have a look for your reference about our 200-301 Exam Topics Pdf test prep. As long as you spare one or two hours a day to study with our latest 200-301 Exam Topics Pdf quiz prep, we assure that you will have a good command of the relevant knowledge before taking the exam.
Cisco 200-301 Exam Topics Pdf - You must make a decision as soon as possible!
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our 200-301 Exam Topics Pdf preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 200-301 Exam Topics Pdf study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 200-301 Exam Topics Pdf certification.
If you are agonizing about how to pass the exam and to get the Cisco certificate, now you can try our learning materials. Our reputation is earned by high-quality of our learning materials.
200-301 PDF DEMO:
QUESTION NO: 1
Which two tasks must be performed to configure NTP to a trusted server in client mode on a single network device? (Choose two)
A. Verify the time zone.
B. Disable NTP broadcasts
C. Set the NTP server private key
D. Specify the IP address of the NTP server
E. Enable NTP authentication.
Answer: D,E
Explanation:
To configure authentication, perform this task in privileged mode:
Step 1: Configure an authentication key pair for NTP and specify whether the key will be trusted or untrusted.
Step 2: Set the IP address of the NTP server and the public key.
Step 3: Enable NTP client mode.
Step 4: Enable NTP authentication.
Step 5: Verify the NTP configuration.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst4000/8-
2glx/configuration/guide/ ntp.html
QUESTION NO: 2
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 3
Refer to the exhibit. After you apply the given configuration to arouter, the DHCP clients behind the device connot communicate with hosts outside of their subnet.
Which action is most likely to correct the problem?
A. configure the default gateway
B. Configure the dns server on the same subnet as the clients
C. Activate the dhcp pool
D. Correct the subnet mask
Answer: A
QUESTION NO: 4
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 5
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
IIA IIA-CIA-Part2-KR - Learning our Cisco Certified Network Associate Exam test practice dump can help them save the time and focus their attentions on their major things. ASQ CQE - We just want to provide you with the best service. Almost all candidates know our SAP C_SAC_2402 exam questions as a powerful brand. Our Amazon SAA-C03 practice materials are made by our responsible company which means you can gain many other benefits as well. But our ISTQB CTAL-TTA study guide will offer you the most professional guidance.
Updated: May 28, 2022