Of course you can freely change another 200-301 Exam Dumps Sheet exam guide to prepare for the next exam. Based on the credibility in this industry, our 200-301 Exam Dumps Sheet study braindumps have occupied a relatively larger market share and stable sources of customers. Such a startling figure --99% pass rate is not common in this field, but we have made it with our endless efforts. Our product is compiled by experts and approved by professionals with years of experiences. You can download and try out our latest 200-301 Exam Dumps Sheet quiz torrent freely before your purchase. Then you can pay for it and download it right away.
CCNA 200-301 It is very easy and convenient to use and find.
As the employment situation becoming more and more rigorous, it’s necessary for people to acquire more 200-301 - Cisco Certified Network Associate Exam Exam Dumps Sheet skills and knowledge when they are looking for a job. Their masterpieces are instrumental to offer help and improve your performance in the real exam. Being dedicated to these practice materials painstakingly and pooling useful points into our 200-301 Test Result exam materials with perfect arrangement and scientific compilation of messages, our 200-301 Test Result practice materials can propel the exam candidates to practice with efficiency.
There is an old saying goes, good memory is inferior to sodden ability to write, so we believe that it is a highly productive way for you to memory the knowledge point and review the reference books more effectively. Besides our 200-301 Exam Dumps Sheet exam torrent support free demo download, as we mentioned before, it is an ideal way for you to be fully aware of our 200-301 Exam Dumps Sheet prep guide and then purchasing them if suitable and satisfactory. There is no doubt that among our three different versions of 200-301 Exam Dumps Sheet guide torrent, the most prevalent one is PDF version, and this is particularly suitable and welcomed by youngsters.
Our Cisco 200-301 Exam Dumps Sheet exam questions are often in short supply.
At this time, you will stand out in the interview among other candidates with the 200-301 Exam Dumps Sheet certification. Constant improvement is significant to your career development. Your current achievements cannot represent your future success. Never stop advancing. Come to study our 200-301 Exam Dumps Sheet learning materials. Stick to the end, victory is at hand. Action always speaks louder than words. With the help of our 200-301 Exam Dumps Sheet study questions, you can reach your dream in the least time.
Once it is time to submit your exercises, the system of the 200-301 Exam Dumps Sheet preparation exam will automatically finish your operation. After a several time, you will get used to finish your test on time.
200-301 PDF DEMO:
QUESTION NO: 1
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
QUESTION NO: 2
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 3
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 4
Which set of action satisfy the requirement for multi-factor authentication?
A. The user enters a user name and password and then re-enters the credentials on a second screen
B. The user swipes a key fob, then clicks through an email link
C. The user enters a user name and password, and then clicks a notification in an authentication app on a mobile device
D. The user enters a PIN into an RSA token, and then enters the displayed RSA key on a login screen
Answer: C
Explanation:
This is an example of how two-factor authentication (2FA) works:
1. The user logs in to the website or service with their username and password.
2. The password is validated by an authentication server and, if correct, the user becomes eligible for the second factor.
3. The authentication server sends a unique code to the user's second-factor method (such as a smartphone app).
4. The user confirms their identity by providing the additional authentication for their second-factor method.
QUESTION NO: 5
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
IBM S1000-007 - We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well. We sincerely hope that you can pay more attention to our SAP C-C4H320-34 study questions. SAP C_BW4H_214 - We are happy to tell you that The Cisco Certified Network Associate Exam exam questions from our company will help you save time. IAPP CIPP-C - To avoid being washed out by the artificial intelligence, we must keep absorbing various new knowledge. CWNP CWISA-102 - Only through our careful inspection, the study material can be uploaded to our platform.
Updated: May 28, 2022