It will help us to pass the exam successfully. This is the best shortcut to success. Everyone has the potential to succeed, the key is what kind of choice you have. As long as you use 200-301 Exam Dumps File learning materials and get a 200-301 Exam Dumps File certificate, you will certainly be appreciated by the leaders. As you can imagine that you can get a promotion sooner or latter, not only on the salary but also on the position, so what are you waiting for? Just come and buy our 200-301 Exam Dumps File study braindumps. To get the Cisco 200-301 Exam Dumps File exam certification is the goal of many IT people & Network professionals.
CCNA 200-301 Then, you need to upgrade and develop yourself.
As long as you study with our 200-301 - Cisco Certified Network Associate Exam Exam Dumps File exam questions for 20 to 30 hours, you will pass the exam for sure. Whatever exam you choose to take, Omgzlook training dumps will be very helpful to you. Because all questions in the actual test are included in Omgzlook practice test dumps which provide you with the adequate explanation that let you understand these questions well.
Moreover our 200-301 Exam Dumps File test guides provide customers with supplement service-mock test, which can totally inspire them to study hard and check for defects during their learning process. Our commitment is not frank, as long as you choose our 200-301 Exam Dumps File study tool you will truly appreciate the benefits of our products. We want to provide our customers with different versions of 200-301 Exam Dumps File test guides to suit their needs in order to learn more efficiently.
Cisco 200-301 Exam Dumps File - Then you will be confident in the actual test.
Our 200-301 Exam Dumps File training quiz will be your best teacher who helps you to find the key and difficulty of the exam, so that you no longer feel confused when review. Our 200-301 Exam Dumps File study materials will be your best learning partner and will accompany you through every day of the review. Our 200-301 Exam Dumps File exam quiz will help you to deal with all the difficulties you have encountered in the learning process and make you walk more easily and happily on the road of studying.
You shouldn't miss any possible chance or method to achieve your goal, especially our 200-301 Exam Dumps File exam cram PDF always has 100% passing rate. Mostly choice is greater than effort.
200-301 PDF DEMO:
QUESTION NO: 1
Refer to the exhibit. C-router is to be used as a "router-on-a-stick" to route between the
VLANs.
All the interfaces have been properly configured and IP routing is operational. The hosts in the VLANs have been configured with the appropriate default gateway.
What is true about this configuration?
A. These commands need to be added to the configuration:
C-router(config)# router rip
C-router(config-router)# network 172.19.0.0
B. These commands need to be added to the configuration:
C-router(config)# router ospf 1
C-router(config-router)# network 172.19.0.0 0.0.3.255 area 0
C. These commands need to be added to the configuration:
C-router(config)# router eigrp 123
C-router(config-router)# network 172.19.0.0
D. No further routing configuration is required.
Answer: D
Explanation:
Since all the same router (C-router) is the default gateway for all three VLANs, all traffic destined to a different VLAN will be sent to the C-router. The C-router will have knowledge of all three networks since they will appear as directly connected in the routing table. Since the C-router already knows how to get to all three networks, no routing protocols need to be configured.
QUESTION NO: 2
A router running EIGRP has learned the same route from two different paths. Which parameter does the router use to select the best path?
A. administrative distance
B. as-path
C. metric
D. cost
Answer: C
Explanation:
If a router learns two different paths for the same network from the same routing protocol, it has to decide which route is better and will be placed in the routing table. Metric is the measure used to decide which route is better (lower number is better). Each routing protocol uses its own metric.
For example, RIP uses hop counts as a metric, while OSPF uses cost.
https://study-ccna.com/administrative-distance-metric/
QUESTION NO: 3
Which statement about Link Aggregation when implemented on a Cisco Wireless LAN
Controller is true?
A. One functional physical port is needed to pass client traffic
B. The EtherChannel must be configured in "mode active"
C. When enabled the WLC bandwidth drops to 500 Mbps
D. To pass client traffic two or more ports must be configured.
Answer: A
Explanation:
Link aggregation (LAG) is a partial implementation of the 802.3ad port aggregation standard. It bundles all of the controller's distribution system ports into a single 802.3ad port channel.
Restriction for Link aggregation:
- LAG requires the EtherChannel to be configured for `mode on' on both the controller and the
Catalyst switch -> Answer B is not correct.
- If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller -> Answer A is not correct while answer D is correct.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/ b_cg75_chapter_0100010.html
QUESTION NO: 4
Drag and Drop Question
Drag and drop the WLAN components from the left onto the correct descriptions on the right.
Answer:
Explanation:
The service port can be used management purposes, primarily for out-of-band management.
However, AP management traffic is not possible across the service port. In most cases, the service port is used as a "last resort" means of accessing the controller GUI for management purposes. For example, in the case where the system distribution ports on the controller are down or their communication to the wired network is otherwise degraded.
A dynamic interface with the Dynamic AP Management option enabled is used as the tunnel source for packets from the controller to the access point and as the destination for CAPWAP packets from the access point to the controller.
The virtual interface is used to support mobility management, Dynamic Host Configuration Protocol
(DHCP) relay, and embedded Layer 3 security such as guest web authentication. It also maintains the
DNS gateway host name used by Layer 3 security and mobility managers to verify the source of certificates when Layer 3 web authorization is enabled.
Reference: https://www.cisco.com/c/en/us/td/docs/wireless/controller/8-5/config- guide/b_cg85/ports_and_interfaces.html
QUESTION NO: 5
Which network allows devices to communicate without the need to access the Internet?
A. 209.165.201.0/24
B. 192.0.0.0/8
C. 172.28.0.0/16
D. 1729.0.0/16
Answer: C
Explanation:
This question asks about the private ranges of IPv4 addresses. The private ranges of each class of IPv4 are listed below:
Class A private IP address ranges from 10.0.0.0 to 10.255.255.255 Class B private IP address ranges from 172.16.0.0 to 172.31.255.255 Class C private IP address ranges from 192.168.0.0 to
192.168.255.255 Only the network 172.28.0.0/16 belongs to the private IP address (of class B).
AACN CCRN-Adult - Our study materials will help you get the according certification you want to have. The APICS CSCP real questions are written and approved by our It experts, and tested by our senior professionals with many years' experience. The SAP C_BW4H_2404 study braindumps are compiled by our frofessional experts who have been in this career fo r over ten years. Google Professional-Cloud-Developer vce demo gives you the prep hints and important tips, helping you identify areas of weakness and improve both your conceptual knowledge and hands-on skills. AAPC CPC - This is indeed a huge opportunity.
Updated: May 28, 2022