In today's rapid economic development, society has also put forward higher and higher requirements for us. In addition to the necessary theoretical knowledge, we need more skills. Our 1Z1-821 Valid Test Tips exam simulation is a great tool to improve our competitiveness. And i love this version most also because that it is easy to take with and convenient to make notes on it. Omgzlook can satisfy the fundamental demands of candidates with concise layout and illegible outline of our 1Z1-821 Valid Test Tips exam questions. We hope you can feel that we sincerely hope to help you.
Oracle Solaris 1Z1-821 They have always been in a trend of advancement.
Oracle Solaris 1Z1-821 Valid Test Tips - Oracle Solaris 11 System Administration So our goal is to achieve the best learning effect in the shortest time. As long as you practice our Reliable Real Exam 1Z1-821 Questions And Answers test question, you can pass exam quickly and successfully. By using them, you can not only save your time and money, but also pass Reliable Real Exam 1Z1-821 Questions And Answers practice exam without any stress.
So you are able to adjust your learning plan of the 1Z1-821 Valid Test Tips guide test flexibly. We hope that our new design can make study more interesting and colorful. You also can send us good suggestions about developing the study material.
Oracle 1Z1-821 Valid Test Tips test question will change your perception.
Our 1Z1-821 Valid Test Tips exam prep will give you a complete after-sales experience. You can consult online no matter what problems you encounter. You can get help anywhere, anytime in our 1Z1-821 Valid Test Tips test material. 1Z1-821 Valid Test Tips test questions have very high quality services in addition to their high quality and efficiency. If you use 1Z1-821 Valid Test Tips test material, you will have a very enjoyable experience while improving your ability. We have always advocated customer first. If you use our learning materials to achieve your goals, we will be honored. 1Z1-821 Valid Test Tips exam prep look forward to meeting you.
Our company attaches great importance on improving the 1Z1-821 Valid Test Tips study prep. In addition, we clearly know that constant improvement is of great significance to the survival of a company.
1Z1-821 PDF DEMO:
QUESTION NO: 1
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 2
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 3
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 4
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 5
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
Using Microsoft PL-400-KR exam prep is an important step for you to improve your soft power. CyberArk CPC-SEN - But you must have a browser on your device. If we update, we will provide you professional latest version of Amazon SOA-C02 dumps torrent as soon as possible, which means that you keep up with your latest knowledge in time. There may be a lot of people feel that the preparation process for Palo Alto Networks PSE-Strata exams is hard and boring, and hard work does not necessarily mean good results, which is an important reason why many people are afraid of examinations. So there is nothing to worry about, just buy our SAP P-S4FIN-2023 exam questions.
Updated: May 28, 2022