Because our 1Z1-821 Valid Exam Question test braindumps are highly efficient and the passing rate is very high you can pass the exam fluently and easily with little time and energy needed. You only need 20-30 hours to learn our 1Z1-821 Valid Exam Question test braindumps and then you can attend the exam and you have a very high possibility to pass the exam. For many people whether they are the in-service staff or the students they are busy in their job, family lives and other things. The privacy protection of users is an eternal issue in the internet age. Many illegal websites will sell users' privacy to third parties, resulting in many buyers are reluctant to believe strange websites. You will feel convenient if you buy our product not only because our 1Z1-821 Valid Exam Question exam prep is of high pass rate but also our service is also perfect.
1Z1-821 Valid Exam Question had a deeper impact on our work.
Oracle Solaris 1Z1-821 Valid Exam Question - Oracle Solaris 11 System Administration Our product boosts many advantages and it is worthy for you to buy it. However, the exam is very difficult for a lot of people. Especially if you do not choose the correct study materials and find a suitable way, it will be more difficult for you to pass the exam and get the Well 1Z1-821 Prep related certification.
Our company has the highly authoritative and experienced team. In order to let customers enjoy the best service, all 1Z1-821 Valid Exam Question exam prep of our company were designed by hundreds of experienced experts. Our 1Z1-821 Valid Exam Question test questions will help customers learn the important knowledge about exam.
Oracle 1Z1-821 Valid Exam Question - And it deserves you to have a try!
Omgzlook is a website to provide IT certification exam training tool for people who attend IT certification exam examinee. Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions. IN a short time of using Omgzlook's simulation test, you can 100% pass the exam. So spending a small amount of time and money in exchange for such a good result is worthful. Please add Omgzlook's training tool in your shopping cart now.
Everything is changing so fast. So do not reject challenging new things.
1Z1-821 PDF DEMO:
QUESTION NO: 1
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 2
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 3
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 4
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 5
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
EMC D-RP-DY-A-24 - These training products to help you pass the exam, we guarantee to refund the full purchase cost. And we always have a very high hit rate on the EMC D-VXB-DY-A-24 study guide by our customers for our high pass rate is high as 98% to 100%. Databricks Databricks-Certified-Professional-Data-Engineer - This will not only lead to a waste of training costs, more importantly, the candidates wasted valuable time. EMC D-RP-DY-A-24 - A lot of our loyal customers are very familiar with their characteristics. OCEG GRCA - We are through thick and thin with you and to accept this challenge together.
Updated: May 28, 2022