You only take 20 to 30 hours to practice our 1Z0-821 Exam Questions Vce guide materials and then you can take the exam. If you use our study materials, you can get the 1Z0-821 Exam Questions Vce certification by spending very little time and energy reviewing and preparing. A good 1Z0-821 Exam Questions Vce certification must be supported by a good 1Z0-821 Exam Questions Vce exam practice, which will greatly improve your learning ability and effectiveness. And there is no exaggeration that our pass rate for our 1Z0-821 Exam Questions Vce study guide is 98% to 100% which is proved and tested by our loyal customers. As you may see the data on the website, our sales volumes of our 1Z0-821 Exam Questions Vce exam questions are the highest in the market. We provide the great service after you purchase our 1Z0-821 Exam Questions Vce cram training materials and you can contact our customer service at any time during one day.
Our 1Z0-821 Exam Questions Vce exam questions are often in short supply.
Oracle Solaris 1Z0-821 Exam Questions Vce - Oracle Solaris 11 System Administration Action always speaks louder than words. If you are satisfied with our New 1Z0-821 Dumps Files training guide, come to choose and purchase. If you buy the Software or the APP online version of our New 1Z0-821 Dumps Files study materials, you will find that the timer can aid you control the time.
As you know, it is troublesome to get the 1Z0-821 Exam Questions Vcecertificate. Now, you are fortunate enough to come across our 1Z0-821 Exam Questions Vce exam guide. We have free demos on the website for our customers to download if you still doubt our products, and you can check whether it is the right one for you before purchase as well.
Oracle 1Z0-821 Exam Questions Vce - Life is full of ups and downs.
Although a lot of products are cheap, but the quality is poor, perhaps users have the same concern for our latest 1Z0-821 Exam Questions Vce exam dump. Here, we solemnly promise to users that our product error rate is zero. Everything that appears in our products has been inspected by experts. In our 1Z0-821 Exam Questions Vce practice materials, users will not even find a small error, such as spelling errors or grammatical errors. It is believed that no one is willing to buy defective products, so, the 1Z0-821 Exam Questions Vce study guide has established a strict quality control system. The entire compilation and review process for latest 1Z0-821 Exam Questions Vce exam dump has its own set of normative systems, and the 1Z0-821 Exam Questions Vce practice materials have a professional proofreader to check all content. Only through our careful inspection, the study material can be uploaded to our platform. So, please believe us, 0 error rate is our commitment.
You just need to pay the relevant money for the 1Z0-821 Exam Questions Vce practice materials. Our system will never deduct extra money from your debit cards.
1Z0-821 PDF DEMO:
QUESTION NO: 1
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 2
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 3
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 4
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 5
Which statement is correct about shudown and init commands?
A. The shutdown command brings the system to the single-user milestone by default. The init command must be used to shut the system down to run level 0.
B. The shutdown command performs a clean shutdown of all services whereas init does not.
C. The shutdown command accepts SMF milestones, init stages, or run levels as arguments whereas init accepts only init stages or run levels as arguments.
D. shutdown broadcasts one or more periodic shutdown warning messages to all logged-in users whereas init issues none.
Answer: D
In general, users can only wait about 5-10 minutes to receive our CompTIA CAS-005 learning material, and if there are any problems with the reception, users may contact our staff at any time. Based on the statistics, prepare the exams under the guidance of our Scrum SAFe-SASM practice materials, the user's pass rate is up to 98% to 100%, And they only need to practice latest Scrum SAFe-SASM exam dump to hours. Appian ACA100 - In the current market, there are too many products of the same type. IBM C1000-005 - According to different audience groups, our products for the examination of the teaching content of a careful division, so that every user can find a suitable degree of learning materials. Someone around you must be using our ISACA CISA-KR exam questions.
Updated: May 28, 2022