The clients can consult our online customer staff about how to refund, when will the money be returned backed to them and if they can get the full refund or they can send us mails to consult these issues. Generally speaking, the clients will pass the test if they have finished learning our 1Z0-821 Exam Questions Fee test guide with no doubts. The odds to fail in the test are approximate to zero. If you make up your mind of our 1Z0-821 Exam Questions Fee exam prep, we will serve many benefits like failing the first time attached with full refund service, protecting your interests against any kinds of loss. In a word, you have nothing to worry about with our 1Z0-821 Exam Questions Fee study guide. You can be respected and enjoy the great fame among the industry.
Oracle Solaris 1Z0-821 Nowadays, it is hard to find a desirable job.
Oracle Solaris 1Z0-821 Exam Questions Fee - Oracle Solaris 11 System Administration It is more and more important for us to keep pace with the changeable world and improve ourselves for the beautiful life. Luckily, we are going to tell you a good new that the demo of the Reliable 1Z0-821 Dumps Ppt study materials are easily available in our company. If you buy the study materials from our company, we are glad to offer you with the best demo of our study materials.
Whether you are newbie or experienced exam candidates, our 1Z0-821 Exam Questions Fee study guide will relieve you of tremendous pressure and help you conquer the difficulties with efficiency. If you study with our 1Z0-821 Exam Questions Fee practice engine for 20 to 30 hours, we can claim that you can pass the exam as easy as a pie. Why not have a try?
Oracle 1Z0-821 Exam Questions Fee - Now they have a better life.
If we waste a little bit of time, we will miss a lot of opportunities. If we miss the opportunity, we will accomplish nothing. Then, life becomes meaningless. Our 1Z0-821 Exam Questions Fee preparation exam have taken this into account, so in order to save our customer’s precious time, the experts in our company did everything they could to prepare our 1Z0-821 Exam Questions Fee study materials for those who need to improve themselves quickly in a short time to pass the exam to get the 1Z0-821 Exam Questions Fee certification.
Once you choose our training materials, you chose hope. Our learning materials are based on the customer's point of view and fully consider the needs of our customers.
1Z0-821 PDF DEMO:
QUESTION NO: 1
When you issue the "gzip: zommand not found" message is displayed. You need to install the gzip utility on your system.
Which command would you use to check if the gzip utility is available from the default publisher for installation?
A. pkg info|grep gzip
B. pkg list SUNWgzip
C. pkg contents gzip
D. pkg search gzip
Answer: D
Explanation:
Searching for Packages
Use the pkg search command to search for packages whose data matches the specified pattern.
Like the pkg contents command, the pkg search command examines the contents of packages. While the pkg contents command returns the contents, the pkg search command returns the names of packages that match the query.
pkg search
search [-HIaflpr] [-o attribute ...] [-s repo_uri] query
Search for matches to the query, and display the results.
Which tokens are indexed are action-dependent, but may include content hashes and pathnames.
Note: pkg is the retrieval client for the image packaging system. With a valid configuration, pkg can be invoked to create locations for packages to be installed, called 'images', and install packages into those images. Packages are published by publishers, who may make their packages available at one or more repositories. pkg, then, retrieves packages from a publisher's repository and installs them into an image.
QUESTION NO: 2
You are attempting to edit your crontab file in the bash shell. Instead of getting your usual vi interface, you are presented with an unfamiliar interface. In order to have your editor of choice-vi- what command must you type after exiting the unfamiliar editor?
A. EDITOR=vi
B. crontab=vi
C. crontab - e vi
D. env
Answer: A
Explanation:
Set the EDITOR variable to vi.
Commands like `crontab -e` will use ed per default. If you'd like to use some better editor (like vi) you can use the environment variable EDITOR:
# EDITOR=vi; crontab -e will open the users crontab in vi. Of course you can set this variable permanently.
Incorrect answers
C: -e Edits a copy of the current user's crontab file, or creates an empty file to edit if crontab does not exist. When editing is complete, the file is installed as the user's crontab file. If a username is given, the specified user's crontab file is edited, rather than the current user's crontab file; this can only be done by a user with the solaris.jobs.admin authorization. The environment variable EDITOR determines which editor is invoked with the -e option. The default editor is ed(1). All crontab jobs should be submitted using crontab. Do not add jobs by just editing the crontab file, because cron is not aware of changes made this way.
QUESTION NO: 3
You are using AI to install a new system. You have added to following information to the AI manifest:
<configuration type= "zone" name= "dbzone" source =
"http://sysA.example.com/zone_cfg/zone.cfg"/>
Which statement is true with regard to the zone.cfg?
A. The zone.cfg file is text file in a zonecfg export format.
B. The zone.cfg file is an AI manifest that specifies how the zone is to be installed.
C. The zone.cfg file is an xml file in a form suitable for use as a command file for the zonecfg command.
D. The zone.cfg file is an SC profile with keywords that are specific for configuring a as part of the installation process.
E. It is am xml configuration file from the /etc/zone directory. It will be used as a profile for the zone.
It specifies the zonename, zonepath, and other zonecfg parameters.
Answer: A
Explanation:
https://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#scrolltoc
http://docs.oracle.com/cd/E23824_01/html/E21798/glitd.html#aizoneconf
QUESTION NO: 4
You created a new zpool. Now you need to migrate the existing ZFS file system from pool1/prod to pool2/prod.
You have these requirements:
1. Users must have access to the data during the migration, so you cannot shutdown the file system while the migration takes place.
2. Because you want to copy the data as quickly as possible, you need to increase the server resources devoted to the ZFS migration.
Which method would you use to modify the ZFS shadow migration daemon defaults to increase the concurrency and overall speed of migration?
A. Svccfg - s filesystem/shadowd:defaultsetprop config_params/shadow_threads=integer:
16endsvcadm refresh filesystem/shadowd: default
B. Specify the -b <blocksize> option with the zfs create command and increase the value of
<blocksize>
C. Use the -o -volblocksize=<blocksize>option with the zfs create command and increase the value of the default <blocksize>.
D. Svccfg -s filesystem/zfs: defaultsetprop config_params/shadow_threads = integer: 16endsvcadm refresh filesystem/zfs:default
Answer: A
Explanation:
shadowd is a daemon that provides background worker threads to migrate data for a shadow migration. A shadow migration gradually moves data from a source file system into a new "shadow" file system. Users can access and change their data within the shadow file system while migration is occurring.
The shadowd service is managed by the service management facility, smf(5).
Administrative actions on this service, such as enabling, disabling, or requesting restart, can be performed using svcadm(1M). The service's status can be queried using the svcs(1) command.
The svccfg(1M) command can be used to manage the following parameter related to shadowd:
config_params/shadow_threads
Note: Oracle Solaris 11: In this release, you can migrate data from an old file system to a new file system while simultaneously allowing access and modification of the new file system during the migration process.
Setting the shadow property on a new ZFS file system triggers the migration of the older data.
The shadow property can be set to migrate data from the local system or a remote system with either of the following values:
file:///path
nfs://host:path
QUESTION NO: 5
Which command should you choose to display the current parameters for the FSS scheduler?
A. dispadmin - c FSS
B. prionctl -c FSS
C. dispadmin -c FSS -g
D. priocntl -c FSS -g
Answer: C
Explanation:
The dispadmin command displays or changes process scheduler parameters while the system is running.
-c class
Specifies the class whose parameters are to be displayed or changed. Valid class values are:
RT for the real-time class, TS for the time-sharing class, IA for the inter-active class, FSS for the fair- share class, and FX for the fixed-priority class. The time-sharing and inter- active classes share the same scheduler, so changes to the scheduling parameters of one will change those of the other.
-g
Gets the parameters for the specified class and writes them to the standard output.
EMC D-PSC-DY-23 - Commonly speaking, people like the in-service staff or the students are busy and don’t have enough time to prepare the exam. The staff of Fortinet FCP_FGT_AD-7.4 study materials is online 24 hours a day, seven days a week. Our ISC CISSP-CN training guide has been well known in the market. We understand you can have more chances getting higher salary or acceptance instead of preparing for the Microsoft SC-300 exam. Microsoft MB-335 - In the end, you will become an excellent talent.
Updated: May 28, 2022