We employ the senior lecturers and authorized authors who have published the articles about the test to compile and organize the JN0-643 Test Dumps prep guide dump. Our expert team boosts profound industry experiences and they use their precise logic to verify the test. They provide comprehensive explanation and integral details of the answers and questions. So these JN0-643 Test Dumps latest dumps will be a turning point in your life. And on your way to success, they can offer titanic help to make your review more relaxing and effective. We strongly advise you to buy our online engine and windows software of the JN0-643 Test Dumps study materials, which can simulate the real test environment.
JNCIP JN0-643 You will never come across system crashes.
If you encounter some problems when using our JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) Test Dumps study materials, you can also get them at any time. You can download the electronic invoice of the JN0-643 Exam Bootcamp study materials and reserve it. Once you have decided to purchase our JN0-643 Exam Bootcamp study materials, you can add it to your cart.
As long as you study with our JN0-643 Test Dumps exam braindumps for 20 to 30 hours that we can claim that you will pass the exam for sure. We really need this efficiency. Perhaps you have doubts about this "shortest time." I believe that after you understand the professional configuration of JN0-643 Test Dumps training questions, you will agree with what I said.
But our Juniper JN0-643 Test Dumps exam questions really did.
We have chosen a large number of professionals to make JN0-643 Test Dumps learning question more professional, while allowing our study materials to keep up with the times. Of course, we do it all for you to get the information you want, and you can make faster progress. You can also get help from JN0-643 Test Dumps exam training professionals at any time when you encounter any problems. We can be sure that with the professional help of our JN0-643 Test Dumps test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose JN0-643 Test Dumps test guide to get you closer to success.
With deeply understand of core knowledge JN0-643 Test Dumps actual test guide, you can overcome all the difficulties in the way. So our JN0-643 Test Dumps exam questions would be an advisable choice for you.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
A customer is trying to configure a router to peer using EBGP to a neighbor. As shown in the exhibit, two links are being used for this configuration. The goal of this configuration is to load-balance traffic across both EBGP links.
Which configuration accomplishes this goal?
A. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
B. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
forwarding-table {
export load-balance;
}
{master:0}[edit]
user@router# show policy-options policy-statement load-balance
term balance {
then {
load-balance per-packet;
accept;
}
}
C. {master:0}[edit]
user@router# show protocols bgp
group External {
multi-path;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
D. {master:0}[edit]
user@router# show protocols bgp
group External {
multipath;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
Answer: B
QUESTION NO: 2
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, Host2 is the only host currently joining group 231.1.1.1, but S1 is still flooding the traffic to all hosts on VLAN 100.
What feature can be configured on S1 to limit the multicast flooding of traffic to only interested hosts on VLAN 100?
A. Multicast scoping
B. IGMP snooping
C. Multicast VLAN registration
D. IGMP immediate leave
Answer: B
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
A. Traffic destined for R2 will be blackholed.
B. Transit traffic will follow the R1-R2-R4 path.
C. Traffic destined for R2 will reach R2.
D. Transit traffic will follow the R1-R3-R4 path.
Answer: C,D
QUESTION NO: 5
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
But our Microsoft MB-700 exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%. Microsoft DP-203 - We provide free tryout before the purchase to let you decide whether it is valuable or not by yourself. Fortinet FCP_FMG_AD-7.4 - Time is so important to everyone because we have to use our limited time to do many things. And you will find that it is easy to understand the content of the Fortinet NSE5_FMG-7.2 learning guide for our experts have simplified the questions and answers. Generally speaking, 98 % - 99 % of the users can successfully pass the SAP C_C4H51_2405 exam, obtaining the corresponding certificate.
Updated: May 28, 2022