If you buy our JN0-643 Study Plan exam questions, then you will find that Our JN0-643 Study Plan actual exam has covered all the knowledge that must be mastered in the exam. You just should take the time to study JN0-643 Study Plan preparation materials seriously, no need to refer to other materials, which can fully save your precious time. To keep up with the changes of the exam syllabus, our JN0-643 Study Plan practice engine are continually updated to ensure that they can serve you continuously. If you think i'm exaggerating, you might as well take a look at our JN0-643 Study Plan actual exam. With a high pass rate as 98% to 100%, you will be bound to pass the exam. Though our JN0-643 Study Plan training guide is proved to have high pass rate, but If you try our JN0-643 Study Plan exam questions but fail in the final exam, we can refund the fees in full only if you provide us with a transcript or other proof that you failed the exam.
JNCIP JN0-643 You must seize the good chances when it comes.
JNCIP JN0-643 Study Plan - Enterprise Routing and Switching, Professional (JNCIP-ENT) We have tried our best to simply the difficult questions. And our JN0-643 Reliable Exam Test practice engine will be your best friend to help you succeed. Now, our JN0-643 Reliable Exam Test study questions are in short supply in the market.
When you try our part of Juniper certification JN0-643 Study Plan exam practice questions and answers, you can make a choice to our Omgzlook. We will be 100% providing you convenience and guarantee. Remember that making you 100% pass Juniper certification JN0-643 Study Plan exam is Omgzlook.
Juniper JN0-643 Study Plan - I wish you good luck.
Omgzlook website is fully equipped with resources and the questions of Juniper JN0-643 Study Plan exam, it also includes the Juniper JN0-643 Study Plan exam practice test. Which can help candidates prepare for the exam and pass the exam. You can download the part of the trial exam questions and answers as a try. Omgzlook provide true and comprehensive exam questions and answers. With our exclusive online Juniper JN0-643 Study Plan exam training materials, you'll easily through Juniper JN0-643 Study Plan exam. Our site ensure 100% pass rate.
Juniper JN0-643 Study Plan is a very important certification exam in the IT industry and passing Juniper certification JN0-643 Study Plan exam is very difficult. But in order to let the job position to improve spending some money to choose a good training institution to help you pass the exam is worthful.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 2
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
QUESTION NO: 3
Which two statements are correct about MSTP? (Choose two.)
A. It allows you to preprovision VLAN IDs to spanning tree instances.
B. It provides a more scalable solution than VSTP.
C. It is not supported when using MVRP.
D. It allows you to use VLAN groups to simplify configuration tasks when groups of VLANs use the same parameters.
Answer: A,B
QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 5
-- Exhibit --
user@router> show configuration routing-options
rib-groups {
foo {
import-rib [ inet.8 inet.2 inet.0 ];
}
}
user@router> show configuration protocols pim
rib-group inet foo;
interface all;
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, which routing table is used for IPv4 multicast RPF checks?
A. inet.0
B. inet.2
C. foo.inet.0
D. inet.8
Answer: D
CompTIA CS0-003 - Passed the exam certification in the IT industry will be reflected in international value. Palo Alto Networks XSIAM-Analyst - The questions and answers provided by Omgzlook is obtained through the study and practice of Omgzlook IT elite. Before you decide to buy, you can try a free trial version, so that you will know the quality of the Omgzlook's Juniper CIPS L4M7 exam training materials. Oracle 1Z0-902 - The training materials can help you pass the certification. Omgzlook's Juniper Microsoft MS-900 exam training materials is the best training materials, this is not doubt.
Updated: May 28, 2022