Once you buy the product you can use the convenient method to learn the JN0-643 Mock Exam exam torrent at any time and place. So please take it easy before and after the purchase and trust that our JN0-643 Mock Exam study materials carry no virus. To let you be familiar with our product, we list the features and advantages of the JN0-643 Mock Exam study materials as follow. If you try to free download the demos on the website, and you will be amazed by our excellent JN0-643 Mock Exam preparation engine. We can absolutely guarantee that even if the first time to take the exam, candidates can pass smoothly. We can promise that you would like to welcome this opportunity to kill two birds with one stone.
JNCIP JN0-643 Never stop challenging your limitations.
Over the years, JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) Mock Exam exam questions have helped tens of thousands of candidates successfully pass professional qualification exams, and help them reach the peak of their career. If you want to find a desirable job, you must rely on your ability to get the job. Now, our Exam JN0-643 Registration training materials will help you master the popular skills in the office.
But if the clients buy our JN0-643 Mock Exam training quiz they can immediately use our product and save their time. And the quality of our exam dumps are very high! The procedures of buying our JN0-643 Mock Exam study materials are simple and save the clients’ time.
Juniper JN0-643 Mock Exam - We guarantee you 100% certified.
When you decide to pass the JN0-643 Mock Exam exam and get relate certification, you must want to find a reliable exam tool to prepare for exam. That is the reason why I want to recommend our JN0-643 Mock Exam prep guide to you, because we believe this is what you have been looking for. Moreover we are committed to offer you with data protect act and guarantee you will not suffer from virus intrusion and information leakage after purchasing our JN0-643 Mock Exam guide torrent. The last but not least we have professional groups providing guidance in terms of download and installment remotely.
I think with this certification, all the problems will not be a problem. However, to pass this certification is a bit difficult.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 2
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
QUESTION NO: 3
Which two statements are correct about MSTP? (Choose two.)
A. It allows you to preprovision VLAN IDs to spanning tree instances.
B. It provides a more scalable solution than VSTP.
C. It is not supported when using MVRP.
D. It allows you to use VLAN groups to simplify configuration tasks when groups of VLANs use the same parameters.
Answer: A,B
QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 5
-- Exhibit --
user@router> show configuration routing-options
rib-groups {
foo {
import-rib [ inet.8 inet.2 inet.0 ];
}
}
user@router> show configuration protocols pim
rib-group inet foo;
interface all;
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, which routing table is used for IPv4 multicast RPF checks?
A. inet.0
B. inet.2
C. foo.inet.0
D. inet.8
Answer: D
ISC CISSP-KR - You may try it! Salesforce PDI - Everyone has a utopian dream in own heart. SAP C_ARSUM_2404 - The job-hunters face huge pressure because most jobs require both working abilities and profound major knowledge. This is the royal road to pass F5 402 exam. However, our Microsoft MB-310 training materials can offer better condition than traditional practice materials and can be used effectively.
Updated: May 28, 2022