Last but not least, our worldwide service after-sale staffs will provide the most considerable and comfortable feeling for you in twenty -four hours a day, as well as seven days a week incessantly. To ensure a more comfortable experience for users of JN0-643 Exam Review test material, we offer a thoughtful package. Not only do we offer free demo services before purchase, we also provide three learning modes for users. And our professionals always keep a close eye on the new changes of the subject and keep updating the JN0-643 Exam Review study questions to the most accurate. As the captioned description said, our JN0-643 Exam Review practice materials are filled with the newest points of knowledge about the exam. First of all, we have the best and most first-class operating system, in addition, we also solemnly assure users that users can receive the information from the JN0-643 Exam Review certification guide within 5-10 minutes after their payment.
JNCIP JN0-643 So your error can be corrected quickly.
JNCIP JN0-643 Exam Review - Enterprise Routing and Switching, Professional (JNCIP-ENT) If you find any problems during use, you can give us feedback. Many students often complain that they cannot purchase counseling materials suitable for themselves. A lot of that stuff was thrown away as soon as it came back.
This shows what? As long as you use our products, you can pass the exam! Do you want to be one of 99? Quickly purchase our JN0-643 Exam Review exam questions! And you will find that the coming exam is just a piece of cake in front of you.
Juniper JN0-643 Exam Review - Come on!
The passing rate is the best test for quality of our JN0-643 Exam Review study materials. And we can be very proud to tell you that the passing rate of our JN0-643 Exam Review Exam Questions is almost 100%. That is to say, as long as you choose our study materials and carefully review according to its content, passing the JN0-643 Exam Review exam is a piece of cake. We're definitely not exaggerating. If you don't believe, you can give it a try.
We introduce a free trial version of the JN0-643 Exam Review learning guide because we want users to see our sincerity. JN0-643 Exam Review exam prep sincerely hopes that you can achieve your goals and realize your dreams.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
QUESTION NO: 2
You are asked to configure an interface policer. You must ensure when the bandwidth limit and burst size are exceeded, that the packet receives a CoS parameter which increases the probability that the packet will be dropped if the queues are congested.
Which policer action will accomplish this requirement?
A. dscp 0
B. loss-priority high
C. ip-precedence 0
D. loss-priority low
Answer: B
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 4
Which two statements are correct about MSTP? (Choose two.)
A. It allows you to preprovision VLAN IDs to spanning tree instances.
B. It provides a more scalable solution than VSTP.
C. It is not supported when using MVRP.
D. It allows you to use VLAN groups to simplify configuration tasks when groups of VLANs use the same parameters.
Answer: A,B
QUESTION NO: 5
-- Exhibit --
user@router> show configuration routing-options
rib-groups {
foo {
import-rib [ inet.8 inet.2 inet.0 ];
}
}
user@router> show configuration protocols pim
rib-group inet foo;
interface all;
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, which routing table is used for IPv4 multicast RPF checks?
A. inet.0
B. inet.2
C. foo.inet.0
D. inet.8
Answer: D
We always strictly claim for our IBM C1000-154 study materials must be the latest version, to keep our study materials up to date, we constantly review and revise them to be at par with the latest Juniper syllabus for IBM C1000-154 exam. Don't worry about channels to the best PECB ISO-IEC-27001-Lead-Implementer study materials so many exam candidates admire our generosity of offering help for them. EXIN CDCS - So we solemnly promise the users, our products make every effort to provide our users with the latest learning materials. Swift CSP-Assessor - All we do and the promises made are in your perspective. If you are the first time to prepare the Microsoft PL-500-CN exam, it is better to choose a type of good study materials.
Updated: May 28, 2022