Do you want to choose a lifetime of mediocrity or become better and pursue your dreams? I believe you will have your own pursuit. Perhaps you do not know how to go better our JN0-643 100 Accuracy learning engine will give you some help. The choice is like if a person is at a fork, and which way to go depends on his own decision. You can browse through our JN0-643 100 Accuracy certification test preparation materials that introduce real exam scenarios to build your confidence further. Choose from an extensive collection of products that suits every JN0-643 100 Accuracy certification aspirant. After your payment, we will send the updated JN0-643 100 Accuracy exam to you immediately and if you have any question about updating, please leave us a message.
JNCIP JN0-643 These interactions have inspired us to do better.
Passing the JN0-643 - Enterprise Routing and Switching, Professional (JNCIP-ENT) 100 Accuracy exam is like the vehicle's engine. After you purchase our product you can download our JN0-643 Latest Exam Camp Materials study materials immediately. We will send our product by mails in 5-10 minutes.
We can guarantee that the study materials from our company will help you pass the exam and get the certification in a relaxed and efficient method. More and more people look forward to getting the JN0-643 100 Accuracy certification by taking an exam. However, the exam is very difficult for a lot of people.
Juniper JN0-643 100 Accuracy - So you can take a best preparation for the exam.
Every detail of our JN0-643 100 Accuracy exam guide is going through professional evaluation and test. Other workers are also dedicated to their jobs. Even the proofreading works of the JN0-643 100 Accuracy study materials are complex and difficult. They still attentively accomplish their tasks. Please have a try and give us an opportunity. Our JN0-643 100 Accuracy preparation quide will totally amaze you and bring you good luck. And it deserves you to have a try!
Omgzlook's training tool has strong pertinence, which can help you save a lot of valuable time and energy to pass IT certification exam. Our exercises and answers and are very close true examination questions.
JN0-643 PDF DEMO:
QUESTION NO: 1
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
A customer is trying to configure a router to peer using EBGP to a neighbor. As shown in the exhibit, two links are being used for this configuration. The goal of this configuration is to load-balance traffic across both EBGP links.
Which configuration accomplishes this goal?
A. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
B. {master:0}[edit]
user@router# show protocols bgp
group External {
multihop;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
forwarding-table {
export load-balance;
}
{master:0}[edit]
user@router# show policy-options policy-statement load-balance
term balance {
then {
load-balance per-packet;
accept;
}
}
C. {master:0}[edit]
user@router# show protocols bgp
group External {
multi-path;
local-address 192.168.2.1;
peer-as 65532;
neighbor 192.168.5.1;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop [ 10.10.2.2 10.20.2.2 ];
}
autonomous-system 65432;
D. {master:0}[edit]
user@router# show protocols bgp
group External {
multipath;
local-address 192.168.2.1;
peer-as 65532;
neighbor 10.10.2.2;
neighbor 10.20.2.2;
}
{master:0}[edit]
user@router# show routing-options
static {
route 192.168.5.1/32 next-hop 192.168.2.1;
}
autonomous-system 65432;
Answer: B
QUESTION NO: 2
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
Referring to the exhibit, which two statements are correct? (Choose two.)
A. Traffic destined for R2 will be blackholed.
B. Transit traffic will follow the R1-R2-R4 path.
C. Traffic destined for R2 will reach R2.
D. Transit traffic will follow the R1-R3-R4 path.
Answer: C,D
QUESTION NO: 3
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, Host2 is the only host currently joining group 231.1.1.1, but S1 is still flooding the traffic to all hosts on VLAN 100.
What feature can be configured on S1 to limit the multicast flooding of traffic to only interested hosts on VLAN 100?
A. Multicast scoping
B. IGMP snooping
C. Multicast VLAN registration
D. IGMP immediate leave
Answer: B
QUESTION NO: 4
-- Exhibit -
-- Exhibit --
Click the Exhibit button.
In the exhibit, the provider bridges are using Q-in-Q tunneling to tunnel VLAN 100 traffic over VLAN
200.
What is the correct VLAN configuration for Q-in-Q tunneling on Provider Bridge A?
A. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
B. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
C. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
}
vlans {
test {
vlan-id 200;
interface {
ge-0/0/10.0;
}
dot1q-tunneling {
customer-vlans 100;
}
}
}
D. interfaces {
ge-0/0/0 {
unit 0 {
family ethernet-switching {
port-mode access;
}
}
}
ge-0/0/10 {
unit 0 {
family ethernet-switching {
port-mode trunk;
vlan {
members test;
}
}
}
}
}
vlans {
test {
vlan-id 100;
interface {
ge-0/0/0.0;
}
dot1q-tunneling {
customer-vlans 200;
}
}
}
Answer: A
QUESTION NO: 5
-- Exhibit --
user@router> show class-of-service scheduler-map two
Scheduler map: two, Index: 56974
Scheduler: sch-best-effort, Forwarding class: best-effort, Index: 26057
Transmit ratE. 1 percent, Rate Limit: exact, Buffer sizE. remainder,
Buffer Limit: exact, Priority: low
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
Scheduler: sch-expedited-forwarding, Forwarding class:
expedited-forwarding, Index: 10026
Transmit ratE. 1 percent, Rate Limit: none, Buffer sizE. 1 percent,
Buffer Limit: none, Priority: high
Excess Priority: unspecified
Drop profiles:
Loss priority Protocol Index Name
Low any 1 <default-drop-profile>
Medium low any 1 <default-drop-profile>
Medium high any 1 <default-drop-profile>
High any 1 <default-drop-profile>
user@router> show interfaces ge-0/0/1 extensive | find "CoS Information"
CoS information:
Direction : Output
CoS transmit queue Bandwidth Buffer
Priority Limit
% bps % usec
0 best-effort 1 10000000 r 0
low exact
1 expedited-forwarding 1 10000000 1 0
high none
Logical interface ge-0/0/1.823 (Index 74) (SNMP ifIndex 506) (Generation 139)
Flags: SNMP-Traps 0x4000 VLAN-Tag [ 0x8100.823 ] Encapsulation: ENET2
Traffic statistics:
Input bytes : 1820224529
Output bytes : 6505980
Input packets: 1436371
Output packets: 75905
(... output truncated ...)
user@router> show interfaces ge-0/0/1 extensive | find "Queue Counters"
Queue counters: Queued packets Transmitted packets Dropped packets
0 best-effort 1343970 1343970 7105
1 expedited-fo 53987 53987
0
2 assured-forw 0 0
0
3 network-cont 0 0
0
Queue number: Mapped forwarding classes
0 best-effort
1 expedited-forwarding
2 assured-forwarding
3 network-control
Active alarms : None
Active defects : None
(... output truncated ...)
-- Exhibit --
Click the Exhibit button.
Based on the configuration in the exhibit, why are you seeing drops in the best-effort queue on the
SRX Series platform?
A. The drop-profile fill level is set too low.
B. Packets are dropped by a firewall policy.
C. The best-effort queue is being shaped.
D. The scheduler is not being applied correctly.
Answer: C
Our IBM C1000-187 study materials absolutely can add more pleasure to your life. IIA IIA-CIA-Part2-CN - If these training products do not help you pass the exam, we guarantee to refund the full purchase cost. If you attach great importance to the protection of personal information and want to choose a very high security product, ISACA CISA real exam is definitely your first choice. Some of the test data on the site is free, but more importantly is that it provides a realistic simulation exercises that can help you to pass the Juniper Juniper JN0-281 exam. Microsoft DP-203-KR - Each of us is dreaming of being the best, but only a few people take that crucial step.
Updated: May 28, 2022