The clients can download our H31-161 Study Plan exam questions and use our them immediately after they pay successfully. Our system will send our H31-161 Study Plan learning prep in the form of mails to the client in 5-10 minutes after their successful payment. The mails provide the links and if only the clients click on the links they can log in our software immediately to learn our H31-161 Study Plan guide materials. 24/7 customer support is favorable to candidates who can email us if they find any ambiguity in the H31-161 Study Plan exam dumps, our support will merely reply to your all H31-161 Study Plan exam product related queries. Omgzlook makes your H31-161 Study Plan exam preparation easy with it various quality features. Our experts have plenty of experience in meeting the requirement of our customers and try to deliver satisfied H31-161 Study Plan exam guides to them.
HCIE-Carrier IP H31-161 It is your right time to make your mark.
Now, let us show you why our H31-161 - HCIE-Carrier IP (Written) Study Plan exam questions are absolutely your good option. During the prolonged review, many exam candidates feel wondering attention is hard to focus. But our Latest Study Guide H31-161 Sheet real exam is high efficient which can pass the Latest Study Guide H31-161 Sheet exam during a week.
So 20-30 hours of study is enough for you to deal with the exam. When you get a H31-161 Study Plan certificate, you will be more competitive than others, so you can get a promotion and your wages will also rise your future will be controlled by yourselves. The questions of our H31-161 Study Plan guide questions are related to the latest and basic knowledge.
It all starts from our Huawei H31-161 Study Plan learning questions.
Only 20-30 hours on our H31-161 Study Plan learning guide are needed for the client to prepare for the test and it saves our client’s time and energy. Most people may wish to use the shortest time to prepare for the test and then pass the test with our H31-161 Study Plan study materials successfully because they have to spend their most time and energy on their jobs, learning, family lives and other important things. Our H31-161 Study Plan study materials can satisfy their wishes and they only spare little time to prepare for exam.
Our H31-161 Study Plan learning material was compiled from the wisdom and sweat of many industry experts. And it is easy to learn and understand our H31-161 Study Plan exam questions.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
We can make sure that our WGU Cybersecurity-Architecture-and-Engineering study materials have the ability to help you solve your problem, and you will not be troubled by these questions above. The exercises and answers of our ASQ CMQ-OE exam questions are designed by our experts to perfectly answer the puzzles you may encounter in preparing for the exam and save you valuable time. We can promise that if you buy our products, it will be very easy for you to pass your VMware 2V0-33.22PSE exam and get the certification. If you compare the test to a battle, the examinee is like a brave warrior, and the good UiPath UiPath-ABAv1 learning materials are the weapon equipments, but if you want to win, then it is essential for to have the good UiPath UiPath-ABAv1 study guide. With a total new perspective, Nutanix NCP-CI-Azure study materials have been designed to serve most of the office workers who aim at getting an exam certification.
Updated: May 27, 2022