We guarantee that you can pass the exam at one time even within one week based on H31-161 Study Guide exam braindumps regularly 98 to 100 percent of former exam candidates have achieved their success by them. We provide tracking services to all customers who purchase our H31-161 Study Guide learning questions 24/7. It is our unshakable faith and our H31-161 Study Guide practice materials will offer tremendous help. It not only can help you protect your eyes, but also it will be very convenient for you to make notes. We believe that you will like our H31-161 Study Guide exam prep. With our H31-161 Study Guide exam guide, you will achieve what you are expecting with ease.
HCIE-Carrier IP H31-161 How diligent they are!
HCIE-Carrier IP H31-161 Study Guide - HCIE-Carrier IP (Written) Your current achievements cannot represent your future success. If you are satisfied with our Valid H31-161 Vce Dumps training guide, come to choose and purchase. If you buy the Software or the APP online version of our Valid H31-161 Vce Dumps study materials, you will find that the timer can aid you control the time.
Our H31-161 Study Guide exam materials are famous among candidates. Once they need to prepare an exam, our H31-161 Study Guide study materials are their first choice. As you know, it is troublesome to get the H31-161 Study Guidecertificate.
Huawei H31-161 Study Guide - You can directly select our products.
According to personal propensity and various understanding level of exam candidates, we have three versions of H31-161 Study Guide study guide for your reference. They are the versions of the PDF, Software and APP online. If you visit our website on our H31-161 Study Guide exam braindumps, then you may find that there are the respective features and detailed disparities of our H31-161 Study Guide simulating questions. And you can free donwload the demos to have a look.
But even the best people fail sometimes. In addition to the lack of effort, you may also not make the right choice on our H31-161 Study Guide exam questions.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 2
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 3
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 4
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
QUESTION NO: 5
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
And our IBM C1000-180 study braindumps deliver the value of our services. You really need our SAP C-THR89-2405 practice materials which can work as the pass guarantee. One decision will automatically lead to another decision, we believe our EMC D-ECS-DY-23 guide dump will make you fall in love with our products and become regular buyers. Obtaining the Axis Communications CTS certification is not an easy task. EMC D-CIS-FN-23 - Through the trial you will have different learning experience, you will find that what we say is not a lie, and you will immediately fall in love with our products.
Updated: May 27, 2022