There are a lot of excellent experts and professors in our company. The high quality of the H31-161 Study Guide reference guide from our company resulted from their constant practice, hard work and their strong team spirit. After a long period of research and development, our H31-161 Study Guide test questions have been the leader study materials in the field. Preparing for the H31-161 Study Guide real exam is easier if you can select the right test questions and be sure of the answers. The H31-161 Study Guide test answers are tested and approved by our certified experts and you can check the accuracy of our questions from our free demo. You absolutely can pass the exam.
HCIE-Carrier IP H31-161 And your life will become better and better.
With H31-161 - HCIE-Carrier IP (Written) Study Guide training prep, you only need to spend 20 to 30 hours of practice before you take the H31-161 - HCIE-Carrier IP (Written) Study Guide exam. An ancient Chinese proverb states that “The journey of a thousand miles starts with a single step”. To be recognized as the leading international exam bank in the world through our excellent performance, our HCIE-Carrier IP (Written) qualification test are being concentrated on for a long time and have accumulated mass resources and experience in designing study materials.
But the mystery is quite challenging to pass H31-161 Study Guide exam unless you have an updated exam material. Thousands of people attempt H31-161 Study Guide exam but majorly fails despite of having good professional experience, because only practice and knowledge isn’t enough a person needs to go through the exam material designed by Huawei, otherwise there is no escape out of reading. Well, you have landed at the right place; Omgzlook offers your experts designed material which will gauge your understanding of various topics.
Huawei H31-161 Study Guide - So just come and have a try!
We think of providing the best services of H31-161 Study Guide exam questions as our obligation. So we have patient after-sales staff offering help 24/7 and solve your problems all the way. Those considerate services are thoughtful for your purchase experience and as long as you need us, we will solve your problems. Our staff is suffer-able to your any questions related to our H31-161 Study Guide test guide. If you get any suspicions, we offer help 24/7 with enthusiasm and patience. Apart from our stupendous H31-161 Study Guide latest dumps, our after-sales services are also unquestionable. Your decision of the practice materials may affects the results you concerning most right now. Good exam results are not accidents, but the results of careful preparation and high quality and accuracy materials like our H31-161 Study Guide practice materials.
These Huawei H31-161 Study Guide exam dumps are authentic and help you in achieving success. Do not lose hope and only focus on your goal if you are using H31-161 Study Guide dumps.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C
Lpi 701-100 - It is a popular belief that only processional experts can be the leading one to do some adept job. We trounce many peers in this industry by our justifiably excellent VMware 2V0-31.24 training guide and considerate services. So do not splurge time on searching for the perfect practice materials, because our SAP C_THR96_2405 guide materials are exactly what you need to have. So please take it easy before and after the purchase and trust that our VMware 2V0-32.22 study materials carry no virus. If you try to free download the demos on the website, and you will be amazed by our excellent VMware 6V0-31.24 preparation engine.
Updated: May 27, 2022