Omgzlook Huawei H31-161 Soft Simulations exam questions are compiled according to the latest syllabus and the actual H31-161 Soft Simulations certification exam. We are also constantly upgrade our training materials so that you could get the best and the latest information for the first time. When you buy our H31-161 Soft Simulations exam training materials, you will get a year of free updates. Our H31-161 Soft Simulations study materials are not only as reasonable priced as other makers, but also they are distinctly superior in the many respects. With tens of thousands of our loyal customers supporting us all the way, we believe we will do a better job in this career. In the IT industry, Huawei's H31-161 Soft Simulations exam certification is the essential certification of the IT industry.
HCIE-Carrier IP H31-161 With it, you will pass the exam easily.
HCIE-Carrier IP H31-161 Soft Simulations - HCIE-Carrier IP (Written) Our product is of high quality and the passing rate and the hit rate are both high. Even if you spend a small amount of time to prepare for Examcollection H31-161 Free Dumps certification, you can also pass the exam successfully with the help of Omgzlook Huawei Examcollection H31-161 Free Dumps braindump. Because Omgzlook exam dumps contain all questions you can encounter in the actual exam, all you need to do is to memorize these questions and answers which can help you 100% pass the exam.
H31-161 Soft Simulations practice materials are typically seen as the tools of reviving, practicing and remembering necessary exam questions for the exam, spending much time on them you may improve the chance of winning. However, our H31-161 Soft Simulations training materials can offer better condition than traditional practice materials and can be used effectively. We treat it as our major responsibility to offer help so our H31-161 Soft Simulations practice guide can provide so much help, the most typical one is their efficiency.
Huawei H31-161 Soft Simulations - If you fail, don't forget to learn your lesson.
All exam materials in H31-161 Soft Simulations learning materials contain PDF, APP, and PC formats. They have the same questions and answers but with different using methods. If you like to take notes randomly according to your own habits while studying, we recommend that you use the PDF format of our H31-161 Soft Simulations study guide. And besides, you can take it with you wherever you go for it is portable and takes no place. So the PDF version of our H31-161 Soft Simulations exam questions is convenient.
Downloading the H31-161 Soft Simulations free demo doesn't cost you anything and you will learn about the pattern of our practice exam and the accuracy of our H31-161 Soft Simulations test answers. We constantly check the updating of H31-161 Soft Simulations vce pdf to follow the current exam requirement and you will be allowed to free update your pdf files one-year.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
We often ask, what is the purpose of learning? Why should we study? Why did you study for Qlik QSDA2024exam so long? As many people think that, even if one day we forget the formula for the area of a triangle, we can still live very well, but if it were not for the knowledge of learning Qlik QSDA2024 exam and try to obtain certification, how can we have the opportunity to good to future life? So, the examination is necessary, only to get the test Qlik QSDA2024 certification, get a certificate, to prove better us, to pave the way for our future life. Our Hitachi HQT-4420 practice exam available in three modes, pdf files, and PC test engine and online test engine, which apply to any level of candidates. Improving your efficiency and saving your time has always been the goal of our IBM C1000-180 preparation exam. SAP C_THR85_2405 online test engine is selected by many candidates because of its intelligence and interactive features. Fortinet NSE7_OTS-7.2 - The clients can choose the version which supports their equipment on their hands to learn.
Updated: May 27, 2022