Compared with other materials available on the market, the main feature of H31-161 Related Content exam materials doesn’t like other materials simply list knowledge points. It allows students to find time-saving and efficient learning methods while memorizing knowledge points. With H31-161 Related Content study braindumps, learning from day and night will never happen. Although there are many ways to help you achieve your purpose, selecting Omgzlook is your wisest choice. Having Omgzlook can make you spend shorter time less money and with greater confidence to pass the exam, and we also provide you with a free one-year after-sales service. First of all, the PDF version H31-161 Related Content certification materials are easy to carry and have no restrictions.
Huawei H31-161 Related Content exam is a Technical Specialist exam.
HCIE-Carrier IP H31-161 Related Content - HCIE-Carrier IP (Written) Besides, it can all the time provide what you want. You can try it later and then decide to take it or leave. So that you can know the Omgzlook's exam material is real and effective.
Omgzlook can not only provide all the information related to the Huawei certification H31-161 Related Content exam for the candidates, but also provide a good learning opportunity for them. Omgzlook be able to help you pass Huawei certification H31-161 Related Content exam successfully. Having a Huawei H31-161 Related Content certification can enhance your employment prospects,and then you can have a lot of good jobs.
Huawei H31-161 Related Content - There are two versions of Omgzlook dumps.
In order to meet the request of current real test, the technology team of research on Omgzlook Huawei H31-161 Related Content exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect Omgzlook Huawei H31-161 Related Content exam materials. This allows Omgzlook to always have the materials of highest quality.
Our target is to reduce your pressure and improve your learning efficiency from preparing for H31-161 Related Content exam. If you still worry about your H31-161 Related Content exam; if you still doubt whether it is worthy of purchasing our software, what you can do to clarify your doubts is to download our H31-161 Related Content free demo.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 2
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
Microsoft MB-220 - If your budget is limited, but you need complete exam material. SAP C_S4FCF_2023 - If not, your usage of our dump this time will make you treat our Omgzlook as the necessary choice to prepare for other IT certification exams later. MuleSoft MCIA-Level-1 - Omgzlook is a website that provide accurate exam materials for people who want to participate in the IT certification. The secret that Omgzlook helps many candidates pass Huawei H28-153_V1.0 exam is Huawei exam questions attentively studied by our professional IT team for years, and the detailed answer analysis. Google Professional-Cloud-Developer - If you choose Omgzlook study guide, you will find the test questions and test answers are certainly different and high-quality, which is the royal road to success.
Updated: May 27, 2022