Now Huawei H31-161 Real Questions certification test is very popular. Not having got H31-161 Real Questions certificate, you must want to take the exam. Indeed, Huawei H31-161 Real Questions test is very difficult exam, but this is not suggested that you cannot get high marks and pass your exam with ease. No matter in the day or on the night, you can consult us the relevant information about our H31-161 Real Questions preparation exam through the way of chatting online or sending emails. I’m sure our 24-hour online service will not disappoint you as we offer our service 24/7 on our H31-161 Real Questions study materials. So our IT technicians of Omgzlook take more efforts to study H31-161 Real Questions exam materials.
HCIE-Carrier IP H31-161 This certification gives us more opportunities.
With the advantage of simulating the real exam environment, you can get a wonderful study experience with our H31-161 - HCIE-Carrier IP (Written) Real Questions exam prep as well as gain the best pass percentage. In the process of job hunting, we are always asked what are the achievements and what certificates have we obtained? Therefore, we get the test Huawei certification and obtain the qualification certificate to become a quantitative standard, and our H31-161 Test Cram Pdf learning guide can help you to prove yourself the fastest in a very short period of time. Life is short for each of us, and time is precious to us.
Our online resources and events enable you to focus on learning just what you want on your timeframe. You get access to every H31-161 Real Questions exams files and there continuously update our H31-161 Real Questions study materials; these exam updates are supplied free of charge to our valued customers. Get the best H31-161 Real Questions exam Training; as you study from our exam-files.
Huawei H31-161 Real Questions - If you make up your mind, choose us!
When you purchase H31-161 Real Questions exam dumps from Omgzlook, you never fail H31-161 Real Questions exam ever again. We bring you the best H31-161 Real Questions exam preparation dumps which are already tested rigorously for their authenticity. Start downloading your desired H31-161 Real Questions exam product without any second thoughts. Our H31-161 Real Questions products will make you pass in first attempt with highest scores. We accept the challenge to make you pass H31-161 Real Questions exam without seeing failure ever!
The staff of H31-161 Real Questions study guide is professionally trained. They can solve any problems you encounter on the H31-161 Real Questions exam questions.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 3
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
QUESTION NO: 5
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
HP HPE2-N71 - Omgzlook trusts in displacing all the qualms before believing us. Secondly, a wide range of practice types and different version of our MuleSoft MCIA-Level-1 exam training questions receive technological support through our expert team. Here we would like to introduce our Huawei H20-421_V1.0 practice materials for you with our heartfelt sincerity. SAP C_S4TM_2023 - Do you want to choose a lifetime of mediocrity or become better and pursue your dreams? I believe you will have your own pursuit. You can browse through our Microsoft AZ-305 certification test preparation materials that introduce real exam scenarios to build your confidence further.
Updated: May 27, 2022