They are version of the PDF,the Software and the APP online. All these versions of H31-161 Passing Score pratice materials are easy and convenient to use. With the quick development of the eletronic products, more and more eletronic devices are designed to apply to our life. What's more, the latest version of our H31-161 Passing Score study materials will be a good way for you to broaden your horizons as well as improve your skills. You will certainly obtain a great chance to get a promotion in your company. Also, you can make notes on your papers to help you memorize and understand the difficult parts of the H31-161 Passing Score exam questions.
HCIE-Carrier IP H31-161 It costs both time and money.
Having been handling in this line for more than ten years, we can assure you that our H31-161 - HCIE-Carrier IP (Written) Passing Score study questions are of best quality and reasonable prices for your information. Besides, the pollster conducted surveys of public opinions of our H31-161 Test Cram Pdf study engine and get desirable outcomes that more than 98 percent of exam candidates feel rewarding after using our H31-161 Test Cram Pdf actual exam. And we enjoy their warm feedbacks to show and prove that we really did a good job in this career.
H31-161 Passing Score study engine is very attentive to provide a demo for all customers who concerned about our products, whose purpose is to allow customers to understand our product content before purchase. Many students suspect that if H31-161 Passing Score learning material is really so magical? Does it really take only 20-30 hours to pass such a difficult certification exam successfully? It is no exaggeration to say that you will be able to successfully pass the exam with our H31-161 Passing Score exam questions.
Huawei H31-161 Passing Score - You must be very surprised.
Our H31-161 Passing Score exam quiz is unlike other exam materials that are available on the market, our H31-161 Passing Score study dumps specially proposed different versions to allow you to learn not only on paper, but also to use mobile phones to learn. This greatly improves the students' availability of fragmented time. So you can achieve your H31-161 Passing Score certification easily without disrupting your daily routine. And we will give you 100% success guaranteed on the H31-161 Passing Score training guide.
With our H31-161 Passing Score test prep, you don't have to worry about the complexity and tediousness of the operation. As long as you enter the learning interface of our soft test engine of H31-161 Passing Score quiz guide and start practicing on our Windows software, you will find that there are many small buttons that are designed to better assist you in your learning.
H31-161 PDF DEMO:
QUESTION NO: 1
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D
QUESTION NO: 2
As shown in the figure, one enterprise has VPN A, the other has VPN B, and the two VPNs each have two CEs. The following requirements need to be met.VPNA-CE 1 can interwork with VPNA-
CE 2. 2>VPNB-CE 1 can interwork with VPNB-CE 2.
The figure shows the types of links between CEs and PEs and the VC IDs used in Martini mode.
Which of the following VC ID configurations are correct?
A. VCID1 = 1, VCID2 = 1, VCID3 = 2, VCID4 = 2
B. VCID1 = 2, VCID2 = 2, VCID3 = 2, VCID4 = 2
C. VCID1 = 1, VCID2 = 2, VCID3 = 3, VCID4 = 4
D. VCID1 = 1, VCID2 = 2, VCID3 = 1, VCID4 = 2
Answer: B,D
QUESTION NO: 3
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C
QUESTION NO: 4
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B
QUESTION NO: 5
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E
Huawei H13-821_V3.0 - Can you survive and be invincible in a highly competitive society? Can you gain a foothold in such a complex society? If your answer is "no", that is because your ability is not strong enough. In such a way, you can confirm that you get the convenience and fast from our SAP C-THR83-2405 study guide. Our Tableau TDS-C01 exam questions are your best choice. SAP C-WZADM-2404 - According to the survey, the average pass rate of our candidates has reached 99%. According to the research statistics, we can confidently tell that 99% candidates after using our products have passed the EMC D-PWF-DS-23 exam.
Updated: May 27, 2022