H31-161 Exam Cost - Reliable H31-161 Exam Materials & HCIE Carrier IP (Written) - Omgzlook

Let me be clear here a core value problem of Omgzlook. All Huawei exams are very important. In this era of rapid development of information technology, Omgzlook just questions provided by one of them. That is to say, it is easier to find an online environment to do your practices. This version of H31-161 Exam Cost test prep can be used on any device installed with web browsers. When we started offering Huawei H31-161 Exam Cost exam questions and answers and exam simulator, we did not think that we will get such a big reputation.

HCIE-Carrier IP H31-161 Select Omgzlook is to choose success.

One strong point of our APP online version is that it is convenient for you to use our H31-161 - HCIE-Carrier IP (Written) Exam Cost exam dumps even though you are in offline environment. Are you a brave person? If you did not do the best preparation for your IT certification exam, can you take it easy? Yes, of course. Because you have Omgzlook's Huawei Cheap H31-161 Dumps exam training materials.

With the help of our H31-161 Exam Cost study guide, you can adjust yourself to the exam speed and stay alert according to the time-keeper that we set on our H31-161 Exam Cost training materials. Therefore, you can trust on our H31-161 Exam Cost exam materials for this effective simulation function will eventually improve your efficiency and assist you to succeed in the H31-161 Exam Cost exam. And we believe you will pass the H31-161 Exam Cost exam just like the other people!

Huawei H31-161 Exam Cost - Money back guaranteed and so on.

Perhaps you have wasted a lot of time to playing computer games. It doesn’t matter. It is never too late to change. There is no point in regretting for the past. Our H31-161 Exam Cost exam questions can help you compensate for the mistakes you have made in the past. You will change a lot after learning our H31-161 Exam Cost study materials. And most of all, you will get reward by our H31-161 Exam Cost training engine in the least time with little effort.

If you master all key knowledge points, you get a wonderful score. If you choose our H31-161 Exam Cost exam review questions, you can share fast download.

H31-161 PDF DEMO:

QUESTION NO: 1
As shown in the figure, CEs connect to users 1 and 2 through access interfaces or links.
[Quidway-GigabitEthernet1/0/4]portswitch
[Quidway-GigabitEthernet1/0/4]port link-type access
[Quidway-GigabitEthernet1/0/4]port default vlan 1
[Quidway-GigabitEthernet1/0/6]portswitch
[Quidway-GigabitEthernet1/0/6]port link-type access
[Quidway-GigabitEthernet1/0/6]port default vlan 2
[Quidway-GigabitEthernet1/0/3]portswitch
[Quidway-GigabitEthernet1/0/3]port link-type trunk
[Quidway-GigabitEthernet1/0/3]port trunk permit-pass vlan 1 to 2
Users 1 and 2 require different network transmission quality. Which of the following methods are feasible to configure 802.1p priority 1 for packets of user 1 and 802.1p priority 2 for packets of user
2?
A. On a PE, configure vlan-stacking and STC for interfaces on the private network for users 1 and 2.
B. On a PE, configure Dot1q tunnel interfaces and simple traffic classification (STC) for interfaces on the private network.
C. On a PE, configure vlan-mapping and STC for interfaces on the private network for users 1 and 2.
D. On a CE, configure STC for user VLANs on the user access side.
Answer: A,C

QUESTION NO: 2
Which statement about MPLS Echo packets is true?
A. The MPLS Echo request is an ICMP packet.
B. The MPLS Echo request is a UDP packet.
C. The type value of the MPLS Echo request packet is 0.
D. The type value of the MPLS Echo reply packet is 8
Answer: B

QUESTION NO: 3
As shown in the figure, the DiffServ model is deployed in E-LSP mode on the MPLS network. A tester connects to GE interfaces of RTA and RTC on the edge of the MPLS network through GE links.
The trust upstream default command is configured for interfaces on the IP access side of RTA and
RTC. When the tester sends IP packets with DSCP values 10, 12, and 14,the DSCP values of IP packets received at the receiver side are supposed to remain unchanged. However, the DSCP values of all received IP packets are 10. In this case, which of the following statements are true? (Default mapping is configured between the EXP and DSCP values on each router.)
A. The DSCP values of packets the tester receives are 10 regardless of whether qos phb disable is configured for the outbound interface on RTC's IP access side.
B. The configurations on RTA or RTC are incorrect.
C. If the qos phb disable command is configured for the outbound interface on the IP access side of
RTC, the DSCP values of packets the tester receives remain unchanged.
D. The DSCP values are 10 when RTA's IP packets leave the MPLS network because the EXP values are
1 when RTA's IP packets enter the MPLS network.
Answer: C,D

QUESTION NO: 4
As shown in the figure , CE and CE 2 belong to VPN A, CE 3 and CE 4 belong to VPN B, VPN A and VPN B share the public network tunnels between border PE 1 and PE 2, and LDP tunnels are configured between PE 1 and PE 2. To isolate resources for VPN service data from PE 2 to PE 1, a unidirectional TE tunnel is configured t forward data from PE1. The QoS policy propagation though the border gateway protocol (QPPB) feature is configured on PE 2, and a QoS policy is defined when
VPNs are bound to tunnel interfaces.
Which of the following statements about the configurations on PE 2 are true?
A. The maximum reserved bandwidth must not exceed the bandwidth of the physical links.
B. The mpls te commit command must be configured on the Post/0/0 interface.
C. The maximum reserved bandwidth must not exceed the bandwidth of the tunnels.
D. The mpls te commit command must be configured on the Tunnel1/0/0 interface,
E. The mpls te cspf command must be configured in the global MPLS view.
Answer: A,D,E

QUESTION NO: 5
As shown in the figure, DUT stands for the device under test and RTA is used to support the test. Which combination of the following configurations is mandatory for fast convergence?
1. BFD
2. Minimum LSP refreshing interval
3. Most sensitive SPF timer
4. Minimum Hello packet sending interval
5. Minimum LSP sending interval
6. Longest computing time of SPF slices
7. Minimum LSP retransmission interval
8. Minimum LSP generation time
9. Flash-flood
10. GR function
11. Setting cost-style to wide
A. 1, 2, 3, 5, 7, 8, 9
B. 3, 5, 6
C. 3, 5, 6, 8, 9C.1, 3, 5, 6, 9
Answer: C

CompTIA N10-009 - There is no doubt that the certification has become more and more important for a lot of people, especial these people who are looking for a good job, and it has been a general trend. HP HPE0-V25 - Please totally trust the accuracy of questions and answers. The high quality of the SAP C-C4H620-34 reference guide from our company resulted from their constant practice, hard work and their strong team spirit. Preparing for the IBM S2000-020 real exam is easier if you can select the right test questions and be sure of the answers. Also, we will offer good service to add you choose the most suitable Huawei H28-153_V1.0 practice braindumps since we have three different versions of every exam product.

Updated: May 27, 2022