You might think that it is impossible to memorize well all knowledge. We can tell you that our 350-401 Test Simulator test prep concentrate on systematic study, which means all your study is logic. Why not give us a chance to prove? Our 350-401 Test Simulator guide question dumps will never let you down. Market is a dynamic place because a number of variables keep changing, so is the practice materials field of the 350-401 Test Simulator practice exam. Our 350-401 Test Simulator exam dumps are indispensable tool to pass it with high quality and low price. You also can send us good suggestions about developing the study material.
350-401 Test Simulator exam prep look forward to meeting you.
Now, our company is specialized in design, development, manufacturing, marketing and retail of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Simulator test question, aimed to provide high quality product, solutions based on customer's needs and perfect service of the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Simulator exam braindump. We need to have more strength to get what we want, and Reliable 350-401 Test Camp Questions exam dumps may give you these things. After you use our study materials, you can get Reliable 350-401 Test Camp Questions certification, which will better show your ability, among many competitors, you will be very prominent.
In addition, the 350-401 Test Simulator study dumps don’t occupy the memory of your computer. When the online engine is running, it just needs to occupy little running memory. At the same time, all operation of the online engine of the 350-401 Test Simulator training practice is very flexible as long as the network is stable.
Cisco 350-401 Test Simulator - Please remember you are the best.
Annual test syllabus is essential to predicate the real 350-401 Test Simulator questions. So you must have a whole understanding of the test syllabus. After all, you do not know the 350-401 Test Simulator exam clearly. It must be difficult for you to prepare the 350-401 Test Simulator exam. Then our study materials can give you some guidance. All questions on our 350-401 Test Simulator study materials are strictly in accordance with the knowledge points on newest test syllabus. Also, our experts are capable of predicating the difficult knowledge parts of the 350-401 Test Simulator exam according to the test syllabus. We have tried our best to simply the difficult questions. In order to help you memorize the 350-401 Test Simulator study materials better, we have detailed explanations of the difficult questions such as illustration, charts and referring website. Every year some knowledge is reoccurring over and over. You must ensure that you master them completely.
As you can see, many people are inclined to enrich their knowledge reserve. So you must act from now.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
Remember that making you 100% pass Cisco certification EMC D-CSF-SC-23 exam is Omgzlook. If you still desperately cram knowledge and spend a lot of precious time and energy to prepare for passing Cisco certification Huawei H12-811_V1.0 exam, and at the same time do not know how to choose a more effective shortcut to pass Cisco certification Huawei H12-811_V1.0 exam. CheckPoint 156-587 - For tomorrow's success, is right to choose Omgzlook. EMC D-ISM-FN-23-KR - Omgzlook can also promise if you fail to pass the exam, Omgzlook will 100% refund. In today's competitive IT industry, passing Cisco certification Juniper JN0-664 exam has a lot of benefits.
Updated: May 28, 2022