If you want to be one of them, please allow me to recommend the 350-401 Test Simulator learning questions from our company to you, the superb quality of 350-401 Test Simulator exam braindumps we've developed for has successfully helped thousands of candidates to realize their dreams. And our 350-401 Test Simulator study materials have helped so many customers pass the exam. Obtaining the 350-401 Test Simulator certification is not an easy task. As a key to the success of your life, the benefits that 350-401 Test Simulator exam guide can bring you are not measured by money. 350-401 Test Simulator exam guide can not only help you pass the exam, but also help you master a new set of learning methods and teach you how to study efficiently, 350-401 Test Simulator exam material will lead you to success. If you want to pass your exam and get the 350-401 Test Simulator certification which is crucial for you successfully, I highly recommend that you should choose the 350-401 Test Simulator study materials from our company so that you can get a good understanding of the exam that you are going to prepare for.
CCNP Enterprise 350-401 Remember, the fate is in your own hands.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Simulator real dumps has received popular acceptance worldwide with tens of thousands of regular exam candidates who trust our proficiency. Some people say that to pass the Cisco 350-401 Reliable Test Questions Fee exam certification is tantamount to success. Yes, this is true.
We regard the customer as king so we put a high emphasis on the trust of every users, therefore our security system can protect you both in payment of 350-401 Test Simulator guide braindumps and promise that your computer will not be infected during the process of payment on our 350-401 Test Simulator study materials. Moreover, if you end up the cooperation between us,we have the responsibility to delete your personal information on 350-401 Test Simulator exam prep. In a word, Wwe have data protection act for you to avoid information leakage!
Cisco 350-401 Test Simulator - At first, it can be only used on PC.
Different from other similar education platforms, the 350-401 Test Simulator quiz guide will allocate materials for multi-plate distribution, rather than random accumulation without classification. How users improve their learning efficiency is greatly influenced by the scientific and rational design and layout of the learning platform. The Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) prepare torrent is absorbed in the advantages of the traditional learning platform and realize their shortcomings, so as to develop the 350-401 Test Simulator test material more suitable for users of various cultural levels. If just only one or two plates, the user will inevitably be tired in the process of learning on the memory and visual fatigue, and the 350-401 Test Simulator test material provided many study parts of the plates is good enough to arouse the enthusiasm of the user, allow the user to keep attention of highly concentrated.
Our 350-401 Test Simulator free dumps demo will provide you some basic information for the accuracy of our exam materials. All questions and answers in our 350-401 Test Simulator real dumps are tested by our certified trainers with rich experience and one or two days is enough for you practicing valid 350-401 Test Simulator exam pdf.
350-401 PDF DEMO:
QUESTION NO: 1
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 2
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
We will send our SAP C_TS4FI_2023 exam guide within 10 minutes after your payment. There are three versions according to your study habit and you can practice our SAP C-C4H320-34 dumps pdf with our test engine that help you get used to the atmosphere of the formal test. Since the HP HPE7-A02 study quiz is designed by our professionals who had been studying the exam all the time according to the changes of questions and answers. All these versions of Juniper JN0-223 pratice materials are easy and convenient to use. The experts in our company are always keeping a close eye on even the slightest change on the Pegasystems PEGACPCSD23V1 exam questions in the field.
Updated: May 28, 2022