We can help you to achieve your goals. Omgzlook's Cisco 350-401 Test Prep exam training materials provide the two most popular download formats. One is PDF, and other is software, it is easy to download. We can lead you the best and the fastest way to reach for the certification of 350-401 Test Prep exam dumps and achieve your desired higher salary by getting a more important position in the company. With the help of our 350-401 Test Prep practice materials, you can successfully pass the actual exam with might redoubled. I think that for me is nowhere in sight.
CCNP Enterprise 350-401 It is unmarched high as 98% to 100%.
CCNP Enterprise 350-401 Test Prep - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Too much hesitating will just waste a lot of time. If you have any questions, you can contact our specialists. We will provide you with thoughtful service.
Before you try to attend the 350-401 Test Prep practice exam, you need to look for best learning materials to easily understand the key points of 350-401 Test Prep exam prep. There are 350-401 Test Prep real questions available for our candidates with accurate answers and detailed explanations. We are ready to show you the most reliable 350-401 Test Prep pdf vce and the current exam information for your preparation of the test.
Cisco 350-401 Test Prep - It is so cool even to think about it.
In this highly competitive modern society, everyone needs to improve their knowledge level or ability through various methods so as to obtain a higher social status. Under this circumstance passing 350-401 Test Prep exam becomes a necessary way to improve oneself. And you are lucky to find us for we are the most popular vendor in this career and have a strong strength on providing the best 350-401 Test Prep study materials. And the price of our 350-401 Test Prep practice engine is quite reasonable.
The easy language does not pose any barrier for any learner. The complex portions of the 350-401 Test Prep certification syllabus have been explained with the help of simulations and real-life based instances.
350-401 PDF DEMO:
QUESTION NO: 1
Which description of an SD-Access wireless network infrastructure deployment is true?
A. The wireless client is part of the fabric overlay.
B. The access point is part of the fabric underlay.
C. The WLC is part of the fabric underlay.
D. The access point is part the fabric overlay.
Answer: B
QUESTION NO: 2
Which statement about a fabric access point is true?
A. It is in local mode an must connected directly to the fabric edge switch.
B. It is in FlexConnect mode and must be connected directly to the fabric edge switch.
C. It is in FlexConnect mode and must be connected directly to the fabric border node.
D. It is in local mode an must be connected directly to the fabric border node.
Answer: A
Explanation:
Fabric mode APs continue to support the same wireless media services that traditional APs support; apply AVC, quality of service (QoS), and other wireless policies; and establish the CAPWAP control plane to the fabric WLC. Fabric APs join as local-mode APs and must be directly connected to the fabric edge node switch to enable fabric registration events, including RLOC assignment via the fabric
WLC. The fabric edge nodes use CDP to recognize APs as special wired hosts, applying special port configurations and assigning the APs to a unique overlay network within a common EID space across a fabric. The assignment allows management simplification by using a single subnet to cover the AP infrastructure at a fabric site.
Reference: https://www.cisco.com/c/en/us/td/docs/solutions/CVD/Campus/sda-sdg-2019oct.html
QUESTION NO: 3
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
QUESTION NO: 4
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
IAPP AIGP - As the old saying goes, skills will never be burden. Now, I am glad to introduce a secret weapon for all of the candidates to pass the exam as well as get the related certification without any more ado-- our Huawei H13-334_V1.0 study braindumps. Maybe you still have doubts about our HP HPE0-V28 exam braindumps. Our high-quality SAP E-S4CPE-2023} learning guide help the students know how to choose suitable for their own learning method, our SAP E-S4CPE-2023 study materials are a very good option. As is known to us, there are best sale and after-sale service of the SAP C-WZADM-2404 certification training dumps all over the world in our company.
Updated: May 28, 2022