The one who choose our study materials that consider our website as the top preparation material seller for 350-401 Test Pdf study materials, and inevitable to carry all candidates the finest knowledge on exam syllabus contents. Not only that, we will provide you a free update service within one year from the date of purchase, in order to keep up the changes in the exam so that every candidates who purchase our{ ExamCode} study materials can pass the exam one time. We always strictly claim for our 350-401 Test Pdf study materials must be the latest version, to keep our study materials up to date, we constantly review and revise them to be at par with the latest Cisco syllabus for 350-401 Test Pdf exam. The existence of our 350-401 Test Pdf learning guide is regarded as in favor of your efficiency of passing the exam. Our 350-401 Test Pdf exam questions are supposed to help you pass the exam smoothly. Most importantly, these continuously updated systems are completely free to users.
Also, you can begin to prepare the 350-401 Test Pdf exam.
Because we endorse customers’ opinions and drive of passing the 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Pdf certificate, so we are willing to offer help with full-strength. In our Omgzlook you can get the related Cisco Latest Test Dumps 350-401 Sheet exam certification training tools. Our Omgzlook IT experts team will timely provide you the accurate and detailed training materials about Cisco certification Latest Test Dumps 350-401 Sheet exam.
The finicky points can be solved effectively by using our 350-401 Test Pdf exam questions. With a high pass rate as 98% to 100% in this career, we have been the leader in this market and helped tens of thousands of our loyal customers pass the exams successfully. Just come to buy our 350-401 Test Pdf learning guide and you will love it.
We can help you pass the Cisco Cisco 350-401 Test Pdf exam smoothly.
Our 350-401 Test Pdf practice questions enjoy great popularity in this line. We provide our 350-401 Test Pdf exam braindumps on the superior quality and being confident that they will help you expand your horizon of knowledge of the exam. They are time-tested 350-401 Test Pdf learning materials, so they are classic. As well as our after-sales services. And we can always give you the most professional services on our 350-401 Test Pdf training guide.
Omgzlook's Cisco 350-401 Test Pdf exam training materials are the necessities of each of candidates who participating in the IT certification. With this training material, you can do a full exam preparation.
350-401 PDF DEMO:
QUESTION NO: 1
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
QUESTION NO: 2
What is the difference between a RIB and a FIB?
A. The FIB is populated based on RIB content
B. The RIB is used to make IP source prefix-based switching decisions
C. The RIB maintains a mirror image of the FIB
D. The FIB is where all IP routing information is stored
Answer: A
Explanation:
CEF uses a Forwarding Information Base (FIB) to make IP destination prefix-based switching decisions.
The FIB is conceptually similar to a routing table or information base. It maintains a mirror image of the forwarding information contained in the IP routing table. When routing or topology changes occur in the network, the IP routing table is updated, and those changes are reflected in the FIB. The
FIB maintains next-hop address information based on the information in the IP routing table. Because there is a one-to-one correlation between FIB entries and routing table entries, the FIB contains all known routes and eliminates the need for route cache maintenance that is associated with earlier switching paths such as fast switching and optimum switching.
Note: In order to view the Routing information base (RIB) table, use the "show ip route" command.
To view the Forwarding Information Base (FIB), use the "show ip cef" command. RIB is in Control plane while FIB is in Data plane.
QUESTION NO: 3
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
Which feature does Cisco TrustSec use to provide scalable, secure communication throughout a network?
A. security group tag number assigned to each user on a switch
B. security group tag ACL assigned to each router on a network
C. security group tag ACL assigned to each port on a switch
D. security group tag number assigned to each port on a network
Answer: D
Explanation:
Cisco TrustSec uses tags to represent logical group privilege. This tag, called a Security Group Tag
(SGT), is used in access policies. The SGT is understood and is used to enforce traffic by Cisco switches, routers and firewalls . Cisco TrustSec is defined in three phases: classification, propagation and enforcement.
When users and devices connect to a network, the network assigns a specific security group.
This process is called classification. Classification can be based on the results of the authentication or by associating the SGT with an IP, VLAN, or port-profile (-> Answer A and answer C are not correct as they say "assigned ... on a switch" only. Answer D is not correct either as it says "assigned to each router").
Then our experts have carefully summarized all relevant materials of the WGU Introduction-to-IT exam. Getting ISQI CPSA-FL certificate, you will get great benefits. All consumers who are interested in SAP C-S4FTR-2023 guide materials can download our free trial database at any time by visiting our platform. Microsoft DP-203 - Contrary to the low price of Omgzlook exam dumps, the quality of its dumps is the best. Our SAP C_TS4CO_2023 exam braindumps are available for downloading without any other disturbing requirements as long as you have paid successfully, which is increasingly important to an examinee as he or she has limited time for personal study.
Updated: May 28, 2022