We can be sure that with the professional help of our 350-401 Test Pass4Sure test guide you will surely get a very good experience. Good materials and methods can help you to do more with less. Choose 350-401 Test Pass4Sure test guide to get you closer to success. So our 350-401 Test Pass4Sure exam questions would be an advisable choice for you. Some customers might worry that passing the exam is a time-consuming process. But our 350-401 Test Pass4Sure exam questions will help you pass the exam by just one go for we have the pass rate high as 98% to 100%.
CCNP Enterprise 350-401 We are keeping advancing with you.
Omgzlook can help you 100% pass Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Pass4Sure exam, and if you carelessly fail to pass Cisco certification 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Pass4Sure exam, we will guarantee a full refund for you. It is well known that even the best people fail sometimes, not to mention the ordinary people. In face of the Latest 350-401 Mock Test exam, everyone stands on the same starting line, and those who are not excellent enough must do more.
Omgzlook is a website which can help you quickly pass Cisco certification 350-401 Test Pass4Sure exams. In order to pass Cisco certification 350-401 Test Pass4Sure exam, many people who attend Cisco certification 350-401 Test Pass4Sure exam have spent a lot of time and effort, or spend a lot of money to participate in the cram school. Omgzlook is able to let you need to spend less time, money and effort to prepare for Cisco certification 350-401 Test Pass4Sure exam, which will offer you a targeted training.
Cisco 350-401 Test Pass4Sure - You can experience it in advance.
In order to meet the request of current real test, the technology team of research on Omgzlook Cisco 350-401 Test Pass4Sure exam materials is always update the questions and answers in time. We always accept feedbacks from users, and take many of the good recommendations, resulting in a perfect Omgzlook Cisco 350-401 Test Pass4Sure exam materials. This allows Omgzlook to always have the materials of highest quality.
Our target is to reduce your pressure and improve your learning efficiency from preparing for 350-401 Test Pass4Sure exam. If you still worry about your 350-401 Test Pass4Sure exam; if you still doubt whether it is worthy of purchasing our software, what you can do to clarify your doubts is to download our 350-401 Test Pass4Sure free demo.
350-401 PDF DEMO:
QUESTION NO: 1
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 2
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 3
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 4
Which technology provides a secure communication channel for all traffic at Layer 2 of the OSI model?
A. IPsec
B. Cisco Trustsec
C. MACsec
D. SSL
Answer: C
Explanation:
MACsec, defined in 802.1AE, provides MAC-layer encryption over wired networks by using out- of
-band methods for encryption keying. The MACsec Key Agreement (MKA) Protocol provides the required session keys and manages the required encryption keys. MKA and MACsec are implemented after successful authentication using the 802.1x Extensible Authentication Protocol (EAP-TLS) or Pre
Shared Key (PSK) framework.
A switch using MACsec accepts either MACsec or non-MACsec frames, depending on the policy associated with the MKA peer. MACsec frames are encrypted and protected with an integrity check value (ICV). When the switch receives frames from the MKA peer, it decrypts them and calculates the correct ICV by using session keys provided by MKA. The switch compares that ICV to the ICV within the frame. If they are not identical, the frame is dropped. The switch also encrypts and adds an ICV to any frames sent over the secured port (the access point used to provide the secure MAC service to a
MKA peer) using the current session key.
Reference: https://www.cisco.com/c/en/us/td/docs/switches/lan/catalyst9300/software/release/16-
9/configuration_guide/sec/b_169_sec_9300_cg/macsec_encryption.html
Note: Cisco Trustsec is the solution which includes MACsec.
QUESTION NO: 5
To increase total throughput and redundancy on the links between the wireless controller and switch, the customer enabled LAG on the wireless controller.
Which EtherChannel mode must be configured on the switch to allow the WLC to connect?
A. Active
B. On
C. Auto
D. Passive
Answer: B
Explanation:
Restrictions for Link Aggregation:
You can bundle all eight ports on a Cisco 5508 Controller into a single link.
Terminating on two different modules within a single Catalyst 6500 series switch provides redundancy and ensures that connectivity between the switch and the controller is maintained when one module fails. The controller's port 1 is connected to Gigabit interface 3/1, and the controller's port 2 is connected to Gigabit interface 2/1 on the Catalyst 6500 series switch. Both switch ports are assigned to the same channel group.
LAG requires the EtherChannel to be configured for 'mode on' on both the controller and the Catalyst switch.
Once the EtherChannel is configured as on at both ends of the link, the Catalyst switch should not be configured for either Link Aggregation Control Protocol (LACP) or Cisco proprietary Port Aggregation
Protocol (PAgP) but be set unconditionally to LAG. Because no channel negotiation is done between the controller and the switch, the controller does not answer to negotiation frames and the LAG is not formed if a dynamic form of LAG is set on the switch. Additionally, LACP and PAgP are not supported on the controller.
If the recommended load-balancing method cannot be configured on the Catalyst switch, then configure the LAG connection as a single member link or disable LAG on the controller.
https://www.cisco.com/c/en/us/td/docs/wireless/controller/7-5/configuration- guide/b_cg75/b_cg75_chapter_0100010.html
HP HPE0-S60 - We guarantee that you can pass the exam easily. Salesforce Interaction-Studio-Accredited-Professional - If not, your usage of our dump this time will make you treat our Omgzlook as the necessary choice to prepare for other IT certification exams later. APMG-International AgilePM-Foundation - Omgzlook is a website that provide accurate exam materials for people who want to participate in the IT certification. The secret that Omgzlook helps many candidates pass SAP C_DBADM_2404 exam is Cisco exam questions attentively studied by our professional IT team for years, and the detailed answer analysis. WGU Cybersecurity-Architecture-and-Engineering - If you choose Omgzlook study guide, you will find the test questions and test answers are certainly different and high-quality, which is the royal road to success.
Updated: May 28, 2022