We have to understand that not everyone is good at self-learning and self-discipline, and thus many people need outside help to cultivate good study habits, especially those who have trouble in following a timetable. To handle this, our 350-401 Test Guide test training will provide you with a well-rounded service so that you will not lag behind and finish your daily task step by step. At the same time, our 350-401 Test Guide study torrent will also save your time and energy in well-targeted learning as we are going to make everything done in order that you can stay focused in learning our 350-401 Test Guide study materials without worries behind. We not only offer 350-401 Test Guide free demos for your experimental overview of our practice materials, but being offered free updates for whole year long. Here we want to give you a general idea of our 350-401 Test Guide exam questions. The update for our 350-401 Test Guide learning guide will be free for one year and half price concession will be offered one year later.
CCNP Enterprise 350-401 So you can have wide choices.
CCNP Enterprise 350-401 Test Guide - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) With high quality training materials by Omgzlook provided, you will certainly pass the exam. We believe that our study materials will have the ability to help all people pass their Valid Study Guide 350-401 Free Download exam and get the related exam in the near future. Our company have the higher class operation system than other companies, so we can assure you that you can start to prepare for the Valid Study Guide 350-401 Free Download exam with our study materials in the shortest time.
Omgzlook's Cisco 350-401 Test Guide exam training materials is a good training tool. It can help you pass the exam successfully. With this certification, you will get international recognition and acceptance.
Now, quickly download Cisco 350-401 Test Guide free demo for try.
Being anxious for the 350-401 Test Guide exam ahead of you? Have a look of our 350-401 Test Guide training engine please. Presiding over the line of our practice materials over ten years, our experts are proficient as elites who made our 350-401 Test Guide learning questions, and it is their job to officiate the routines of offering help for you. All points are predominantly related with the exam ahead of you. You will find the exam is a piece of cake with the help of our 350-401 Test Guide study materials.
If the 350-401 Test Guide exam is coming and the time is tense, it is better to choose our 350-401 Test Guide test engine dumps. 350-401 Test Guide test engine can simulate the actual test during the preparation and record the wrong questions for our reviewing.
350-401 PDF DEMO:
QUESTION NO: 1
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 2
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 3
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
QUESTION NO: 4
Refer to the exhibit. A port channel is configured between SW2 and SW3. SW2 is not running a
Cisco operating system. When all physical connections are mode, the port channel does not establish.
Based on the configuration excerpt of SW3, what is the cause of the problem?
A. The port-channel interface lead balance should be set to src-mac
B. The port-channel trunk is not allowing the native VLAN.
C. The port-channel should be set to auto.
D. The port channel on SW2 is using an incompatible protocol.
Answer: D
Explanation:
The Cisco switch was configured with PAgP, which is a Cisco proprietary protocol so non-Cisco switch could not communicate.
QUESTION NO: 5
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
And if you want to get all benefits like that, our Huawei H13-334_V1.0 training quiz is your rudimentary steps to begin. The more time you spend in the preparation for SAP C-TS422-2023 training materials, the higher possibility you will pass the exam. If you have bought the Cisco 300-635 exam questions before, then you will know that we have free demos for you to download before your purchase. If you want to buy our SAP C-THR83-2405 training guide in a preferential price, that’s completely possible. By concluding quintessential points into Oracle 1z0-808 actual exam, you can pass the exam with the least time while huge progress.
Updated: May 28, 2022