Moreover our 350-401 Test Engine test guides provide customers with supplement service-mock test, which can totally inspire them to study hard and check for defects during their learning process. Our commitment is not frank, as long as you choose our 350-401 Test Engine study tool you will truly appreciate the benefits of our products. We want to provide our customers with different versions of 350-401 Test Engine test guides to suit their needs in order to learn more efficiently. The talent is everywhere in modern society. This is doubly true for IT field. Due to the shortage of useful practice materials or being scanty for them, many candidates may choose the bad quality exam materials, but more and more candidates can choose our 350-401 Test Engine study materials.
CCNP Enterprise 350-401 Then you will be confident in the actual test.
Our 350-401 - Implementing Cisco Enterprise Network Core Technologies (350-401 ENCOR) Test Engine training quiz will be your best teacher who helps you to find the key and difficulty of the exam, so that you no longer feel confused when review. The secret of success is constancy to purpose. If your purpose is passing exams and getting a certification.
Our study materials will help you get the according certification you want to have. Believe me, after using our study materials, you will improve your work efficiency. You will get more opportunities than others, and your dreams may really come true in the near future.
Cisco 350-401 Test Engine - This is indeed a huge opportunity.
If you are not satisfied with the function of PDF version which just only provide you the questions and answers, the APP version of 350-401 Test Engine exam cram materials can offer you more. APP version can not only simulate the real test scene but also point out your mistakes and notice you to practice many times. This version of Cisco 350-401 Test Engine exam cram materials is rather powerful. If you are willing, you can mark your performance every day and adjust your studying and preparation relatively. 350-401 Test Engine exam cram materials will try our best to satisfy your demand.
As a responsible company, we don't ignore customers after the deal, but will keep an eye on your exam situation. Although we can assure you the passing rate of our 350-401 Test Engine training guide nearly 100 %, we can also offer you a full refund if you still have concerns.
350-401 PDF DEMO:
QUESTION NO: 1
What is the correct EBGP path attribute list, ordered from most preferred to the least preferred, that the BGP best-path algorithm uses?
A. weight, local preference, AS path, MED
B. weight, AS path, local preference, MED
C. local preference, weight MED, AS path
D. local preference, weight, AS path, MED
Answer: A
Explanation:
Path Selection Attributes: Weight > Local Preference > Originate > AS Path > Origin > MED > External
> IGP Cost > eBGP Peering > Router ID
QUESTION NO: 2
Which statement explains why Type 1 hypervisor is considered more efficient than Type 2 hypervisor?
A. Type 1 hypervisor enables other operating systems to run on it
B. Type 1 hypervisor runs directly on the physical hardware of the host machine without relying on the underlying OS
C. Type 1 hypervisor relics on the existing OS of the host machine to access CPU, memory, storage, and network resources.
D. Type 1 hypervisor is the only type of hypervisor that supports hardware acceleration techniques
Answer: B
Explanation:
There are two types of hypervisors: type 1 and type 2 hypervisor.
In type 1 hypervisor (or native hypervisor), the hypervisor is installed directly on the physical server.
Then instances of an operating system (OS) are installed on the hypervisor. Type 1 hypervisor has direct access to the hardware resources. Therefore they are more efficient than hosted architectures.
Some examples of type 1 hypervisor are VMware vSphere/ESXi, Oracle VM Server, KVM and
Microsoft Hyper-V.
In contrast to type 1 hypervisor, a type 2 hypervisor (or hosted hypervisor) runs on top of an operating system and not the physical hardware directly. A big advantage of Type 2 hypervisors is that management console software is not required.
QUESTION NO: 3
Which standard access control entry permits from odd-numbered hosts in the 10.0.0.0/24 subnet?
A. Permit 10.0.0.0.255.255.255.254
B. Permit 10.0.0.1.0.0.0.254
C. Permit 10.0.0.1.0.0.0.0
D. Permit 10.0.0.0.0.0.0.1
Answer: B
Explanation:
Remember, for the wildcard mask, 1's are I DON'T CARE, and 0's are I CARE. So now let's analyze a simple ACL:
access-list 1 permit 172.23.16.0 0.0.15.255
Two first octets are all 0's meaning that we care about the network 172.23.x.x. The third octet of the wildcard mask, 15 (0000 1111 in binary), means that we care about first 4 bits but don't care about last 4 bits so we allow the third octet in the form of 0001xxxx (minimum:00010000 = 16; maximum:
0001111 = 31).
The fourth octet is 255 (all 1 bits) that means I don't care.
Therefore network 172.23.16.0 0.0.15.255 ranges from 172.23.16.0 to 172.23.31.255.
Now let's consider the wildcard mask of 0.0.0.254 (four octet: 254 = 1111 1110) which means we only care the last bit. Therefore if the last bit of the IP address is a "1" (0000 0001) then only odd numbers are allowed. If the last bit of the IP address is a "0" (0000 0000) then only even numbers are allowed.
Note: In binary, odd numbers are always end with a "1" while even numbers are always end with a
"0".
Therefore in this question, only the statement "permit 10.0.0.1 0.0.0.254" will allow all odd- numbered hosts in the 10.0.0.0/24 subnet.
QUESTION NO: 4
Which access controls list allows only TCP traffic with a destination port range of 22-433, excluding port 80?
A. Deny tcp any any ne 80
Permit tcp any any range 22 443
B. Permit tcp any any ne 80
C. Permit tco any any range 22 443
Deny tcp any any eq 80
D. Deny tcp any any eq 80
Permit tco any any gt 21 it 444
Answer: D
QUESTION NO: 5
Which statement about multicast RPs is true?
A. RPs are required for protocol independent multicast sparse mode and dense mode.
B. By default, the RP is needed only to start new sessions with sources and receivers.
C. By default, the RP is needed periodically to maintain sessions with sources and receivers
D. RPs are required only when using protocol independent multicast dense mode.
Answer: B
Explanation:
A rendezvous point (RP) is required only in networks running Protocol Independent Multicast sparse mode (PIM-SM).
By default, the RP is needed only to start new sessions with sources and receivers.
Reference:
https://www.cisco.com/c/en/us/td/docs/ios/solutions_docs/ip_multicast/White_papers/rps.html
For your information, in PIM-SM, only network segments with active receivers that have explicitly requested multicast data will be forwarded the traffic. This method of delivering multicast data is in contrast to the PIM dense mode (PIM-DM) model. In PIM-DM, multicast traffic is initially flooded to all segments of the network. Routers that have no downstream neighbors or directly connected receivers prune back the unwanted traffic.
Besides, we check the update about Dell D-PDPS-A-01 training pdf every day. ISC CISSP - So, there is considerate and concerted cooperation for your purchasing experience accompanied with patient staff with amity. You will grasp the overall knowledge points of Microsoft AZ-900-KR actual test with our pass guide and the accuracy of our Microsoft AZ-900-KR exam answers will enable you spend less time and effort. New questions will be added into the study materials, unnecessary questions will be deleted from the Amazon SAA-C03 exam simulation. One remarkable feature of EMC D-GAI-F-01 actual dumps questions and answers is their similarity with the real exam scenario.
Updated: May 28, 2022